Specifications

22
Basic operation
Handset settings
Handset name (preset to VTECH)
• You can give each handset its own unique
name (such as kitchen or ofce). The name
is shown in the rst line when the handset
is idle. The name can be a up to 16 characters
in length.
• From idle (off) mode, press SEL then or
to HANDSET NAME.
• Press SEL. The display will show the current
setting, for example:
• Press DELETE to backspace then enter the
desired name.
NOTE: The characters are entered in the same
way as for the phonebook, see the table on
page 15.
• Press SEL to conrm.
Language (preset to English)
• From the idle (off) mode, press MENU then
or to LANGUAGE.
• Press SEL. Press or to scroll from
English to French or Spanish.
• Press SEL to conrm.
Dial type (preset to tone)
• From idle (off) mode, press MENU then
or to DIAL TYPE.
• Press SEL then or to scroll to TONE or
PULSE.
• Press SEL to conrm.
NOTE: When the phone is set for pulse dial mode,
it is possible to switch to temporary tone mode
during an ongoing call by pressing *TONE. Once
pressed, tone will be used for rest of the call. After
you hang up, the phone will return to pulse dialing
for the next call.