Specifications
23
Answering system operation
Audible indicators
This system gives you voice prompts for feature
operations and voice conrmations when you press
a button or complete an operation.
Turn answering system on or off
Press ANSWER ON/OFF to turn the system on or off. When the system is turned
on, you will hear “Answering machine on” and the ANSWER ON/OFF light will
be lit. When the system is off, you will hear “Answering machine o” and the
ANSWER ON/OFF light will not be lit. The system will answer after 10 rings if it
is off, then announce “Please enter your remote access code” and wait for you
to enter your two digit code to access code. (See Remote access on page 30
for details.)
Set the clock
When CL ashes in the message window, you will need to set the correct day
and time at the base.
1. Press TIME/SET. The time and day will be announced, followed by “To
begin setting the clock, press TIME/SET, then press CHANGE to change the
setting or press TIME/SET to continue.” Press TIME/SET again. The day will
be announced.
2. Press CHANGE until the system announces the correct day, then press
Answering system operation
TIME/SET. The system announces the current
hour setting.
3. Press CHANGE until the system announces
the correct hour, press TIME/SET. The sys-
tem announces the current minute setting.
4. Press CHANGE to advance the minutes one
at a time.
- OR -
Press and hold CHANGE to advance the
minutes in increments of 10.
• Press TIME/SET, the system announces the current year.
• Press CHANGE to advance the year one at a time.
-OR-
Press and hold CHANGE to advance the years in increase of 10.
• When the system announces the correct year, press TIME/SET.
5. Press CHANGE until the system announces the correct year, then press
TIME/SET.The system announces the current clock setting.