Operation Manual

microSD Memory Card Slot Insert a microSD memory card (not included). (NOTE:

InnoTab

3S is compatible with microSD memory

cards up to 32GB.)

Battery Compartments Insert 4 "AA" batteries (not included) or the rechargeable

battery packs. For battery installation instructions, please

see the section below.

How to Attach the Stylus

Tie one end of the stylus string to the stylus and the other end to the stylus fastener

on the InnoTab

3S.

Installing the Rechargeable Battery Packs

1. Make sure the InnoTab

3S is turned off.

2. Turn the unit over. Slide the battery door lock switches forward and push the

battery covers off to each side to remove them.

3. InsertBatteryPack①intothecompartmentontherightsideandBatteryPack②

into the compartment on the left side.

 •Insertthebatterypackintotheconnectorslotfirst.

 •Thenpressthebatterypackdownuntilitrestsinplace.

4. Replacethebatterycovers.