User Guide

36
• Press and hold REDIAL/PAUSE to insert a dialing pause
(a p appears).
5. Press NEXT.
6. Press q CID or p to highlight one of the following
types:
• Home
• Cell
• Work
• Other
7. Press NEXT. The telephone base displays EDIT NAME.
8. Use the dialing keys to edit the name.
• Press q CID or p to move the cursor to the left or
right.
• Press 0 to add a space.
• Press DELETE or BACKSP to erase a character.
• Press and hold DELETE to erase all characters.
• Press # (pound key) to move the last word to the
front. For example, Johnson Charlie becomes Charlie
Johnson when you press # (pound key).
9. Press SAVE to confirm. You hear a confirmation tone.
N OTES
• If the caller’s name you received from the telephone service
provider is all in capital letters, the first letter of every word remains
a capital letter, while other letters become lower case. However,
the next letter after the prefix “Mac”, “Mc”, “D’”, “C’” or “O’”, is kept
as a capital letter. For example, the “D” in “MacDonald” is kept as a
capital letter. Another exception is that “VAN DER” will be changed
to “Van der”.
• If the telephone number from the caller ID information has already
been saved in the phonebook under a different name, the new
name will overwrite the old one.
• If you save a block number in the caller ID log to the phonebook,
the original name from the caller ID information will be saved.
Save a caller ID log entry to the allow list
Using a cordless handset:
1. Select a desired entry in the caller ID log (see Review a
caller ID log entry).
2. When the desired entry appears, press SAVE.
3. Press q CID or p to highlight Allow list, and then press
SELECT. The screen displays Edit number.
4. Use the dialing keys to edit the number.
• Press q CID or p to move the cursor to the left or
right.
• Press MUTE/DELETE or BACKSP to erase a digit.
• Press and hold MUTE/DELETE to erase all digits.
• Press and hold REDIAL/PAUSE to insert a dialing pause
(a p appears).
5. Press NEXT. The screen displays Edit name.
6. Use the dialing keys to edit the name.
• Press q CID or p to move the cursor to the left or
right.
• Press 0 to add a space.
• Press MUTE/DELETE or BACKSP to erase a character.
• Press and hold MUTE/DELETE to erase all characters.
• Press # (pound key) to move the last word to the
front. For example, Johnson Charlie becomes Charlie
Johnson when you press # (pound key).
7. Press SAVE to confirm. The screen shows Saved to allow
list.
Using the telephone base:
1. Select a desired entry in the caller ID log (see Review a
caller ID log entry).
2. When the desired entry appears, press SAVE.
3. Press q CID or p to highlight Allow list, and then press
SELECT. The screen displays EDIT NUMBER.
4. Use the dialing keys to edit the number.
• Press q CID or p to move the cursor to the left or
right.
• Press DELETE or BACKSP to erase a digit.
• Press and hold DELETE to erase all digits.
• Press and hold REDIAL/PAUSE to insert a dialing pause
(a p appears).
5. Press NEXT. The telephone base displays EDIT NAME.
6. Use the dialing keys to edit the name.
• Press q CID or p to move the cursor to the left or
right.
• Press 0 to add a space.
• Press DELETE or BACKSP to erase a character.
• Press and hold DELETE to erase all characters.
• Press # (pound key) to move the last word to the
front. For example, Johnson Charlie becomes Charlie
Johnson when you press # (pound key).
7. Press SAVE to confirm. The telephone base shows Saved to
allow list.