Owner's Manual

4
Unlock the packaging locks:
Rotate the packaging lock counter-clockwise for
90 degrees
Pull out the packaging lock
GETTING STARTED
BATTERY INSTALLATION
1.MakesuretheunitisOFF.
2. Locate the battery cover on the bottom of the unit.
3.Openthebatterycover.
4.Install 2 new “AA” Size (AM-3/LR6) batteries
following the diagram inside the battery box. (The
use of new alkaline batteries is recommended for
maximumperformance.)
5. Replace the battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc)orrechargeable(Ni-Cd,Ni-MH),ornewandusedbatteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
GETTING STARTED