35000 manual-zhuji0403.
Dear Parent, Your child’s proudest moments are often a parent’s proudest moments. There is nothing more special than the light of a child’s eyes when they are proud of something that they create themselves. At VTech®, we know that each child learns in their own unique way, that’s why we created KidiCreative™, a line of high-tech creative fun for kids through hands-on electronic play. It’s a cool new way to learn music or explore art and photography.
INTRODUCTION Thank you for purchasing the VTech® KidiArt StudioTM! Introduction The KidiArt StudioTM is a unique interactive creative platform designed especially for younger children. With the KidiArt StudioTM, children can take off on wonderful journeys that unleash their creativity and imagination. With a kid-friendly rotating camera, an interactive pen, and a removable, touch-sensitive art pad, being creative has never been so easy.
Assembly Instructions for the table: A Assembly Instructions B C 1. Insert the A, B, and C handles into the open slots on the left leg (as shown above). Then insert the opposite ends into the open slots on the right leg. 2. Make sure the handles are fully inserted into legs, and then screw the 6 nuts onto the outside of the handles (as shown above). for the STOOL: Fully insert the top end of the 4 legs into the slots on the bottom of the seat until they click into place. 2 35000 manual-zhuji0403.
• KidiArt StudioTM main unit with a rotative camera, a touch sensitive art pad and a touch sensitive pen. • Desk Stand for the art pad and stool • PC USB connection cable • TV connection cable • Game cartridge --- KidiArt StudioTM • CD-ROM --- KidiArt StudioTM • Two user manuals WARNING: All packing materials such as tape, plastic sheets, wire ties and tags are not part of this toy and should be discarded for your child’s safety. GETTING STARTED BATTERY INSTALLATION • Make sure the panel is turned OFF.
Battery Notice & Product Features • Remove the battery cover. • Insert 4 “AA”(AM-3 / LR6) batteries as illustrated. BATTERY NOTICE • The use of new alkaline batteries is recommended for maximum performance. • Install batteries correctly observing the polarity (+, -) signs to avoid leakage. • Do not mix old and new batteries. • Do not mix batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
Help Button Press this button to hear the help instructions. Exit Button Press this button to exit the current page. Internal Memory The internal memory in the main unit is shared for all cartridges as artwork storage. It can store approximately 25 pictures or 5 animations. Note: Actual numbers may vary depending on graphics content. TO BEGIN PLAY You can play your VTech® KidiArt StudioTM by connecting to a TV through the included A/V cable. 1. Make sure the main unit is turned OFF. 2.
5. Turn on the KidiArt StudioTM by pressing the ON/OFF button. The green LED light will light up to indicate that the unit is now on. 6. Follow the voice instructions to begin play. Please see the User Manual of the inserted game cartridge for more details and user instructions. CONNECTING TO A PC To Begin Play You can connect your VTech® KidiArt StudioTM to a computer through the included PC USB cable, and then backup your creations for printing or sharing.
THIS PRODUCT IS NOT ENDORSED OR SPONSORED BY ADOBE SYSTEMS INCORPORATED, PUBLISHER OF FLASH. 1. Start Windows®2000/XP/Vista. 2. Insert the KidiArt StudioTM CD-ROM into the CD-ROM / DVD-ROM drive of your computer. 3. If AutoPlay is enabled on your computer, the installation program will be executed automatically. Please follow the on-screen prompts to complete your installation. 4. If AutoPlay is not enabled, select Run from the Start menu and type D:\setup.
Note: If the VTech® KidiArt StudioTM application does not start when the VTech® Application Manager appears, press the KidiArt StudioTM tab icon application. on the menu bar to start the VTech® KidiArt StudioTM USING THE PC APPLICATION Using The PC Application Automatic Artwork Backup If you start the VTech® KidiArt StudioTM PC application with the main unit connected and turned on, the automatic artwork backup will occur after the opening animation.
Step 2. Cartridge Artwork Once inside the folder, you can switch from Thumbnail Mode to Image Mode by clicking on any of the individual artworks. II. Image Mode Return Press to return to the Cartridge Selection Screen. Check Box Click the box to select that artwork. A checkmark will be shown if that artwork is selected. Share Press to share your selected artwork by saving it on your PC. To use the shared files, please go to the “My KidiCreations” folder on your Desktop.
Print Press to print the selected artwork. Note: Using The PC Application 1. Before printing, make sure your computer is connected to a printer. 2. Be sure to set your printing paper size to Letter Size. Delete Press to delete selected artwork. Backward Press to move backward. Forward Press to move forward. Animation Icon This indicates an animation file. Thumbnail Mode Press to return to Thumbnail mode. Disconnect If your system is Windows® 2000, you will see this button on the left.
CARE & MAINTENANCE 1. Keep your KidiArt StudioTM clean by wiping it with a slightly damp cloth. Never use solvents or abrasives. 2. Keep it out of direct sunlight and away from direct sources of heat. 3. Remove the main batteries when not using it for an extended period of time. 4. Avoid dropping it. NEVER try to dismantle it. 5. Always keep the KidiArt StudioTM away from water.
TROUBLESHOOTING Troubleshooting Connected to a TV Problem Possible Reason Solution The KidiArt StudioTM power light does not come on when the ON Button is pressed. Incorrect or missing power connection. Check that new batteries are correctly installed, or an AC/DC adaptor (9V 300mA, centerpositive) is properly connected to the main unit. Program needs to be reset. 1. Disconnect all power supplies (batteries and adaptor), then reconnect them. 2.
Program needs to be reset. 1. Remove the KidiArt StudioTM cartridge and then re-insert it. 2. Disconnect all power supplies (batteries and adaptor), then reconnect them. The TV picture is black and white. Non-matching color system. Make sure the TV is set to the correct TV system (e.g. NTSC or Auto). Cable connection problem. Make sure that the video cable is firmly connected to the video input of the TV. There is a picture on the TV, but no sound.
Troubleshooting The message “File Error” shows when trying to view or open an artwork. The artwork is corrupted. Delete the artwork. The message “Not enough space.” shows when trying to create a new creation. The internal memory of the main unit is full. 1. Backup the artwork to PC first. 2. Then return to TV mode and delete some artwork. Notes: Do not disconnect or turn off the main unit when files saving, uploading to or being sent from PC.
35000 manual-zhuji0403.indd 17 1. Disconnect all power supplies (batteries and USB connection), then reconnect all them. 2. Press the ON/OFF button. 3. If the problem persists, remove the game cartridge. Inspect the inside of the game cartridge by pushing up the protective sleeve on the bottom of the cartridge. Clean the inside piece with a dry, soft cloth. Then, re-insert the cartridge and press the ON/OFF button. 4. If the problem persists, use a pen to press the Reset Slot to reset the main unit.
Troubleshooting The main unit is ON and connected to the PC, but nothing happens on the PC screen. Cable connection problem. Make sure the USB cable is properly connected between the panel and the PC. PC program installation problem. Make sure the KidiArt StudioTM program has been installed on your computer and is running, or re-install it. The main unit is connected to the PC, and the main unit and PC are both on, but the screen is frozen and not responding to any input.
The matching CDROM program has not been installed. Make sure the matching KidiArt StudioTM CD-ROM has been installed. TECHNICAL SUPPORT If you have a problem that cannot be solved by using this manual, we encourage you to visit us online or contact our Consumer Services Department with any problems and/or suggestions that you might have. A support representative will be happy to assist you.
OTHER INFO DISCLAIMER AND LIMITATION OF LIABILITY VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook. VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this software. VTech® Electronics North America, L.L.C.
VTech® KidiArt StudioTM FAQs Question 1: Why won’t the animation files shared to the “My KidiCreations” folder on my Desktop play back on my computer? There may be a problem with your computer’s display card. Contact the display card manufacturer to see if there is an updated version of the display driver you can install. Question 2: I have bought a KidiArt StudioTM, but it will not work with my PC - my PC is looking for a driver. I have searched the Internet and cannot find a VTech® camera driver.
Answer: It sounds like your user account lacks the administrative rights to install external software. Please check with your computer’s administrator to fix the problem. Question 5: My KidiArt StudioTM main unit turns on then immediately shuts off. VTech® KidiArt StudioTM FAQS Answer: Please make sure you are using new batteries. If there is no bad contact due to dirt on the contact spring/plate or deformation of the contact spring or plate, the power should be able to turn on.
Question 8: Will changing batteries erase the unit’s internal memory? Answer: To prevent data loss, we recommend to always backup your artwork to the PC Application. Question 9: When connecting the KidiArt StudioTM to the USB port, I get the message “USB device not recognized, one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.” I am running Windows® XP. Answer: This is most likely a hardware or OS issue.
35000 manual-zhuji0403.
