User`s manual

3
Handset overview
CID/ /VOLUME
Review the caller ID log when
the phone is not in use.
Decrease the listening volume
during a call or message
playback.
Scroll down while in a menu, or
in the directory, caller ID log or
redial list.
Move the cursor to the left when
entering numbers or names.
•
•
•
•
/FLASH
Make or answer a call.
Answer another incoming call
during a call.
•
•
MUTE/DELETE
Mute the microphone during a call.
Delete digits or characters while using
the dialing keys.
Silence the ringer temporarily while
the handset is ringing.
Delete the displayed entry while in the
directory, caller ID log or redial list.
•
•
•
•
/ /VOLUME
Review the directory when the
phone is not in use.
Increase the listening volume
during a call or message
playback.
Scroll up while in a menu, or
in the directory, caller ID log or
redial list.
Move the cursor to the right when
entering numbers or names.
•
•
•
•
MENU/SELECT
Show the menu.
While in a menu, press to
select an item, or save an
entry or setting.
•
•
OFF/CANCEL
Hang up a call.
Silence the ringer temporarily
while the handset is ringing.
Press and hold to erase the
missed call indicator while the
handset is not in use.
Press to return to the previous
menu, or press and hold to
return to idle mode, without
making changes.
•
•
•
•
REDIAL/PAUSE
Press repeatedly to review the
redial list.
Press and hold to insert a
dialing pause while dialing or
entering a number.
•
•
Press and hold to set and turn
on the quiet mode, or turn it off.
Press repeatedly to show other
dialing options when reviewing
a caller ID log entry.
•
•
1/
Press repeatedly to add or
remove 1 in front of the caller ID
log entry before dialing or saving
it to the directory.
Press and hold to set or dial your
voicemail number.
•
•
INT
Start an intercom conversation
or transfer a call.
•
Dialing keys
Enter numbers or characters.
Answer an incoming call.
•
•
Switch to tone dialing
temporarily during a call.
•
Make or answer a call using the
handset speakerphone.
During a call, press to switch between
the speakerphone and the handset.
•
•
Battery charging
Once you have installed the battery, the screen indicates the battery status (see
the table below). For best performance, keep the handset in the telephone base
when not in use. The battery is fully charged after 11 hours of continuous charging.
Battery indicators Battery status Action
The screen is blank, or
displays Put in charger
and flashes.
The battery has no or very
little charge. The handset
cannot be used.
Charge without interruption
(at least 30 minutes).
The screen displays
Low battery and flashes.
The battery has enough
charge to be used for a
short time.
Charge without interruption
(about 30 minutes).
The screen displays
HANDSET 1.
The battery is charged. To keep the battery charged,
place it in the telephone base
when not in use.
/FIND HANDSET
Press to page the system handset.
Bottom of the telephone base
Telephone base overview