User`s manual

6
Call waiting
When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are already on a call.
Press FLASH on the handset or tap FLASH on the telephone base to put the
current call on hold and take the new call.
Press FLASH on the handset or tap FLASH on the telephone base at any time
to switch back and forth between calls.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer without
disconnecting the call. The next call rings normally at the preset volume.
To silence the handset ringer:
Press OFF or MUTE on the handset, then displays and Ringer muted
displays briefly.
To silence the telephone base ringer:
Tap MUTE on the telephone base.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call.
During a call, press on the handset or on the telephone base.
Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals. It automatically returns to pulse dialing mode after you end
the call.
Find handset
Use this feature to find the system handset.
To start paging:
Press /FIND HANDSET at the bottom of the
telephone base. The handset rings and displays
** Paging **.
To end paging:
Press /FIND HANDSET at the bottom of the
telephone base.
-OR-
Press , , OFF or any dialing key on the handset.
-OR-
Place the handset in the telephone base.
Redial list
The handset stores the last 10 telephone numbers dialed. When there are already
10 entries, the oldest entry is deleted to make room for the new entry.
To review and dial a number from the redial list on the handset:
Press REDIAL when the handset is not in use.
Press , or REDIAL repeatedly until the desired entry displays.
Press or to dial.
To delete a redial entry on the handset:
When the desired redial entry displays, press DELETE.
Join a call in progress
You can use the telephone base and the cordless handset, or two cordless
handsets at a time on an outside call. You can buy additional expansion handsets
(LS6005/LS6005-13/LS6005-15/LS6005-16/LS6005-17) for this telephone base.
You can register up to five handsets to the telephone base.
When a device is on a call, press or on another cordless handset, or press
on the telephone base to join the call.
To exit the call, press OFF on the handset or place it back in the telephone
base, or press on the telephone base. The call continues until the other
device hangs up.
Transfer a call
While on an outside call, you can transfer the call from one system device
to another.
To transfer a call from the handset:
During a call, press MENU.
Scroll to Transfer, then press SELECT.
When you have more than one handset, use the dialing keys to enter a
destination device number (7 for the telephone base, or 1 to 5 for
HANDSET 1 to HANDSET 5).
To answer the call on the telephone base, press .
-OR-
To answer the call on the handset, press , or any dialing key.
To transfer a call from the telephone base:
Pick up the handset from the telephone base.
•
•
•
•
1.
2.
•
•
•
•
1.
2.
3.
•
•
1.
2.
•
3.
•