User’s Manual 3-in-1 Learning Zebra Scooter TM © 2010 VTech Printed in China 91-002487-000-000
Dear Parent, Ever notice the look on your baby’s face when they learn something new through their own discovery? These self-accomplished moments are a parent’s greatest reward. To help fulfill them, VTech® created the Jungle Gym® series of toys.
INTRODUCTION Thank you for purchasing the VTech® Jungle Gym™ 3-in-1 Learning Zebra Scooter™! LIGHT-UP BUTTONS HORN BUTTON RECOGNITION SLOT MODE SELECTOR SMILE BUTTON VOLUME CONTROL SWITCH Introduction The VTech® Jungle Gym™ 3-in-1 Learning Zebra Scooter™ converts easily from push walker to ride-on to scooter. Kids can discover their wild side as they move with the zebra and explore new territory with the scooter’s walkie-talkie, compass and flashlight.
One zebra head with electronic parts Two handles One seat One zebra body and two longer screws One big screw Three play pieces and one bucket Two front wheels One axle, one wheel fastener and one wheel cover with two shorter screws One user’s manual Included in This Package INCLUDED IN THIS PACKAGE
WARNING: All packing materials, such as tape, plastic sheets, wire ties and tags are not part of this toy, and should be discarded for your child’s safety. NOTE: Please keep this instruction manual as it contains important information. GETTING STARTED 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the side of the zebra’s head. Use a screwdriver to loosen the screw. 3. Install 2 new ‘AA’ (AM-3/LR6) batteries following the diagram inside the battery box.
• Exhausted batteries are to be removed from the toy. • The supply terminals are not to be short-circuited. • The toy is not to be connected to more than the recommended number of power supplies. • Do not dispose of batteries in fire. ASSEMBLY INSTRUCTIONS With the VTech® Jungle Gym™ 3-in-1 Learning Zebra Scooter™, safety comes first. To ensure your child’s safety, please only assemble this product by an adult. 1.
5. Turn the zebra over to tighten the two longer screws with a screwdriver. These are the screws that attach the neck to the body. 6. Insert the big screw under the seat. You will hear a loud ‘click’ sound. Assembly Instructions 4. Attach the zebra’s head to the body by snapping the head onto the body. You will hear it click into place. Please ensure the head is attached securely to the body. Once the head has been attached, it cannot be removed again. 7. Insert the seat into the hinges of the neck.
CONVERTING THE 3-IN-1 LEARNING ZEBRA SCOOTER 1. To change to ride-on mode, put down the seat, making sure it locks into place. Hang the bucket on the peg on the front of the neck. 2. To change to walker mode, squeeze the two locks under the seat to release the seat. Pull up the seat and the support on the scooter platform, propping the seat with the support. You will hear a loud ‘click’ sound to indicate the seat and support are locked into place.
3. To disassemble the walker mode, squeeze the two locks under the seat, then put down the support plate and the seat. 5. To disassemble the scooter mode, press and hold the black button on the side of the neck, then unscrew the big screw under the seat. Product Features 4. To change to scooter mode, pull the seat up to meet the neck, and tighten the big screw under the seat. PRODUCT FEATURES 1.
2. VOLUME CONTROL SWITCH To adjust the volume, slide the VOLUME CONTROL SWITCH located on the head to LOW VOLUME ( ) or the HIGH VOLUME ( ) position. 3. AUTOMATIC SHUT-OFF To preserve battery life, the VTech® Jungle Gym™ 3-in-1 Learning Zebra Scooter™ will automatically power-down after approximately 45 seconds without input. The unit can be turned on again by pressing any button. ACTIVITIES 1.
3. Press the horn button on the left handle to hear fun horn sounds, a playful phrase, or a song depending on the selected mode. The lights will flash with the sounds. 5. Press the 5 animal light-up buttons to learn animals, animal sounds, scene and color. The animal buttons feature a lion, kangaroo, monkey, hummingbird and hippo with their scene (savannah, outback, jungle, mountain and river). The lights will flash with the sounds. 6.
7. In walker position, push to play and place the bucket on the seat. You will hear fun sounds and melodies. The lights will flash with the sounds. 9. If there is no input to the unit after approximately 5 seconds, you will hear a question. After another 5 seconds if there is still no input, you will hear a fun sung song or an encouraging phrase. After another 5 seconds if there is still no input, you will hear some fun sounds and an encouraging phrase.
SONG LYRICS SONG 1 Hop on and let’s ride. Roll and hit your stride. Then move to the beat. Learning is so neat! SONG 2 Push, roll, we’re movin’ along. CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat source. 3. Remove the batteries when the unit is not in use for an extended period of time. 4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service representative will be happy to help you. For information on this product’s warranty, please call VTech® at 1-800521-2010 in the U.S. or 1-877-352-8697 in Canada. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Other Info T HIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. T HIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
WARNING: Riding the scooter requires adult supervision. Please supervise your child in order to avoid harm to the child and damage to the environment.
