Specifications

2
PREPARATION
MOUSE CONNECTION
1. Make sure the unit is turned OFF.
2. Locate the mouse jack on the back of the unit.
3. Plug the mouse into the mouse jack.
PRINTER CONNECTION
1. Make sure both the VTECH
®
SILVERSTREAK™ learning aid and the printer are turned
OFF.
2. Locate the printer port on the back of the VTECH
®
SILVERSTREAK™ learning product.
3. Connect the printer plug to the printer port.
4. Turn ON the VTECH
®
SILVERSTREAK™ learning product and the printer.
POWER SOURCE
The VTECH
®
SILVERSTREAK™ learning aid can be operated by using 6 “AA” size
batteries or a 9V 300mA AC center-positive adaptor (sold separately).
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit and open it.
3. Insert 6 "AA" size batteries as illustrated.
DO NOT USE RECHARGEABLE BATTERIES
in this unit.
4. Close the battery cover.
BATTERY NOTICE
• Install batteries correctly observing the polarity
(+,
_
) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove batteries from the unit when you are not going to use the unit for a long
time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• Do not short-circuit supply terminals.
34200Manual 2/28/00, 10:00 AM2