User`s manual

37
4. Enter one of the following remote
commands.
Command Description
1 Play all messages.
2 Play only new messages.
3 Delete the current message
(during playback).
33 Delete all old messages.
4 Repeat the current
message (during playback).
5 Stop.
*5 Hear a list of remote
commands.
6 Skip to the next message
(during playback).
*7 Record a new
announcement.
8 End the call.
0 Turn the answering system
on or off.
5. Hang up or press 8 to end the call.
NOTES
! If you do not press any key within
20 seconds, the remote access call
automatically disconnects.
! When the answering system memory is
full, the telephone announces, 
Memory is
full. Enter the remote access code.

! When the answering system is turned off,
the telephone answers after 10 rings, and
announces, 
Please enter your remote
access code.
Set your remote access code
You can set your own remote access
code from 00 to 99.
1. Press MENU when the phone is not
in use.
2. Press ! or to choose Answering
sys and then press SELECT.
3. Press ! or to choose Ans sys
setup and then press SELECT.
4. Press ! or to choose Remote
code and then press SELECT.
5. Press the dialing keys (0-9) to enter
the code, or ! or to select from
00 to 99, then press SELECT to
save. You hear a confirmation tone.