User`s manual

14
Telephone settings
Handset settings
Key tone
The handset is preset to beep with each key press. You can turn Key tone
off, so there are no beeps when you press keys.
Press MENU/SELECT in idle mode.
Press DIR or CID to scroll to >Settings, then press
MENU/SELECT.
Press DIR or CID to scroll to >Key tone, then press
MENU/SELECT.
Press DIR or CID to select On or Off.
Press MENU/SELECT to save your preference.
Set date/time
The answering system announces the day of the week and time of each
message received prior to playing it. If CID time sync is On (see
CID time synchronization on page 15) and you subscribe to caller ID
service, the day, month and time are set automatically with each incoming
call (see About caller ID on page 44). However, the year must be set so that
the day of the week can be calculated from the caller ID information.
Follow the steps below to set the month, day, year and time.
Follow steps 1 and 2 in Key tone on this page.
Press DIR or CID to scroll to >Set date/time, then press MENU/SELECT.
Press MENU/SELECT to choose >Date & time.
Use the dial pad keys (0-9) to enter a two-digit number
(01-12) for the month.
Use the dial pad keys (0-9) to enter a two-digit number
(01-31) for the day.
Use the dial pad keys (0-9) to enter a two-digit number
(00-99) for the year. Press MENU/SELECT.
Use the dial pad keys (0-9) to enter a two-digit number
(01-12) for the hour.
Use the dial pad keys (0-9) to enter a two-digit number
(00-59) for the minute.
Press DIR or CID to choose AM or PM. Press MENU/SELECT to confirm. A
confirmation tone sounds.
NOTE: If the date and time are not set and the handset is powered up, Set date and
Set time appear on the screen to prompt you to set the date and time. You can set the date
and time at this time or set them later by pressing OFF/CLEAR to show the idle mode.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Key tone
>On
Set date
11/20/09
Set time
10:30 PM