User`s manual

15
Telephone settings
CID time synchronization
CID time sync is programmed to be on. If you subscribe to caller ID service,
the day, month and time are set automatically with each incoming call (see
About caller ID on page 44). You can turn CID time sync off so the system
uses the date and time that you set (see Set date/time on page 14).
Press MENU/SELECT in idle mode.
Press DIR or CID to scroll to >Settings, then press MENU/SELECT.
Press DIR or CID to scroll to >Set date/time, then
press MENU/SELECT.
Press DIR or CID to scroll to >CID time sync, then
press MENU/SELECT.
Press DIR or CID to select On or Off.
Press MENU/SELECT to save your preference.
Home area code
If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID history only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID history. If
you dial 10 digits to make a local telephone call, do not use this home area
code feature. If you do, you will not be able to place calls from your caller ID
history as they have only seven digits.
Follow steps 1 and 2 in CID time synchronization on
this page.
Press DIR or CID to scroll to >Home area code, then
press MENU/SELECT.
Press the dial pad keys to enter your three-digit area
code. Press MUTE/REMOVE to delete digits while entering.
Press MENU/SELECT to save the setting.
NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to make
a local call (area code + telephone number), you will need to delete your home area code. While
the home area code is displaying in step 3 above, press and hold MUTE/REMOVE. The home area
code is now restored to its default setting of _ _ _ (empty).
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
Handset settings
Home area code
___
CID time sync
>On