User`s manual

16
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
Press MENU/SELECT in idle mode.
Press DIR or CID to scroll to >Settings, then press
MENU/SELECT.
Press DIR or CID to scroll to >Dial mode, then press
MENU/SELECT.
Press DIR or CID to select Tone or Pulse.
Press MENU/SELECT to save the setting.
NOTE: If you have pulse (rotary) dialing service only, refer to Temporary tone dialing on
page 28 to temporarily switch from pulse to touch-tone dialing during a call.
Website
You can use this feature to view the AT&T website address on the handset.
Press MENU/SELECT in idle mode.
Press DIR or CID to scroll to >Website, then press MENU/SELECT. The
screen shows www.telephones.att.com.
Press MENU/SELECT to return to the previous menu.
1.
2.
3.
4.
5.
1.
2.
3.
Handset settings
Dial mode
>Tone
www.telephones
.att.com