User`s manual

27
Telephone operation
Options while on calls
Volume control
While on a call, press DIR/VOLUME to increase or press
CID/VOLUME to decrease the listening volume.
When the volume reaches the minimum or maximum
setting, you hear two beeps.
NOTE: The handset earpiece volume setting (1-5) and speakerphone volume setting (1-6)
are independent.
Mute
Use the mute function to turn off the microphone while on a call. You can
hear the caller, but the caller does not hear you.
To mute the call:
Press MUTE/REMOVE. When mute is on, the handset
screen shows Muted for a few seconds and the MUTE
icon appears until you turn off mute.
To take the call off mute:
Press MUTE/REMOVE and then resume speaking. When
mute is off, Microphone on appears temporarily on the
handset screen.
-OR-
Mute is automatically canceled when you end the call.
NOTE: The mute feature is automatically canceled if you press PHONE/FLASH
(see Flash/call waiting on this page).
Flash/call waiting
For more information on caller ID with call waiting, refer to About caller ID on
page 44. If you subscribe to call waiting service provided by your telephone
service provider, you hear a beep if someone calls you while you are already
on a call.
Press PHONE/FLASH to put your current call on hold
and take the new call.
Press PHONE/FLASH anytime to switch back and
forth between calls.
•
•
•
•
Muted
10/20
10:30
PM