User`s manual

32
Telephone operation
To make and answer an intercom call
If you have more than one handset (see Adding and registering a handset
on page 60), you can use the intercom feature for conversations between
handsets.
Press MENU/SELECT on your handset when not in use.
Press DIR or CID to scroll to >Intercom, then press
MENU/SELECT.
If you have two handsets, your handset screen shows
Calling other handset. The other handset rings and
its screen shows Other handset is calling.
If you have more than two handsets, your screen
shows Intercom to: Use the dial pad keys to select
the other handset. Your handset screen shows
Calling HANDSET X. The other handset rings and its
screen shows HANDSET X is calling.
To answer the intercom call, press any dial pad key
(0-9, , or #), PHONE/FLASH or SPEAKER on the
other handset. Both handsets now show Intercom.
To end an intercom call, press OFF/CLEAR or place
the handset back in the telephone base or charger.
Both handsets now show Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel the intercom call by pressing
OFF/CLEAR on your originating handset.
If the other handset is not answered within 100 seconds, is in use, on a call or is out of
range, your originating handset shows Unable to call. Try again.
Pressing OFF/CLEAR or MUTE/REMOVE temporarily silences the intercom ringer.
If you have four handsets, when two handsets are on an intercom call, the other two
system handsets can be used on an outside call (see Join a call in process on page 30) or
a separate intercom call.
If you have five handsets and four of them are on intercom calls, you can use the other
handset for an outside call.
1.
2.
•
•
3.
4.
•
•
•
•
•
Intercom
Intercom to:
Calling
HANDSET X
Intercom