User`s manual

Push the doorbell gently onto the wall

mount until they are sealed tightly.

This doorbell meets the IPX4

waterproof standard. Make sure

the doorbell is tightly sealed with its

wall mount in order to maintain its

waterproof ability.

Push

Seal tightly

Tighten the screw into the

threaded socket at the

bottom to secure.

3. Plug the adapter into the

indoor domestic power

supply.

Plug!

Tighten the

screw

After an extended exposure to cold, heat or humidity, the

doorbell gasket rubber may become sticky.

If you need to remove the doorbell from its wall mount cover in

case of battery replacement or doorbell relocation, follow the

steps below.

Detach doorbell from wall mount cover

Remove

the screw

Remove the screw at the

bottom.

1. Insert a ﬂat-bladed

screwdriver between the

doorbell and its wall mount

cover.

Pry open at

both sides