User`s manual

Install the doorbell wall mount cover

Make sure you have done Doorbell location testing

above before you mount the doorbell on the wall.

There are two ways to position the wall mount cover and

manage the power adapter cord.

Option 1: Install the doorbell wall mount cover without the

wall mount plate

If you drill the holes into a

stud, go to Step 3.

-OR-

If you drill the holes into the

wall, insert the wall anchors

into the holes.

2.Use the two holes on the

doorbell wall mount cover

to mark the exact location

of the screw holes on the

wall.

Align the holes on the

wall mount cover with the

holes on the wall. Tighten

the screws into the holes

to secure the wall mount

cover onto the wall.

Align

Use a sharp object to open a

hole on the soft plastic part

on the doorbell wall mount

cover, then route the power

adapter cord through the

hole.

Open a

hole here