User`s manual

9
Align the holes on the wall mount cover
with the holes on the wall. Tighten the
screws into the holes to secure the wall
mount cover onto the wall.
6.
Loosen the screws and the metallic plates, then slide the
metal part of the wires underneath the metallic plates as
shown. Twist the screws to secure.
1.
Wire with
red end
Wire with
black end
Screws
Metallic
plate
Metallic
plate
6
Install the doorbell
If you already have a wired doorbell
installed, see Install the doorbell with an
existing wired doorbell on pages 11 and 12
to install your new IS741 doorbell unit.