User's Manual

7
Install the battery as shown on the next page. Once you have
installed the battery, the screen indicates the battery status (see
the table below). If necessary, place the handset in the charger
to charge the battery. For best performance, keep the handset in
the charger when not in use. The battery is fully charged after 11
hours of continuous charging. See the table on page 65 for battery
operating times.
If the screen is blank, you need to charge the handset without
interruption for at least 30 minutes to give the handset enough
charge to use the telephone for a short time. When the battery is
low, the handset shows Low battery and a flashing .
Battery indicators Battery status Action
The screen is blank or
shows Place in charger
and flashes.
The battery has no or
very little charge. The
handset cannot be used.
Charge without
interruption (at least
30 minutes).
The screen shows
Low battery and
flashes.
Battery has enough
charge to be used for a
short time.
Charge without
interruption (at least
30 minutes).
The screen shows
EXT XX. (XX represents
the extension number of
the device the handset is
registered to).
Battery is charged. To keep the battery
charged, place it in the or
charger when not in use.
Getting started
Battery installation and charging