User`s manual

12
Getting started
Adding and registering a handset
To register a handset to your UP416 console
1. Make sure the cordless handset is out of the
charger and the screen shows Choose
Handset in Registration at base menu.
Put handset on cradle to register.
2. On the UP416 console, press MENU/SELECT.
3. Press or to scroll to Registration,
then press MENU/SELECT or /SKIP.
4. Press MENU/SELECT again or press
/SKIP to select Handset. The UP416
console screen shows Registering
handset... (Put handset on cradle
to start).
5. Place the unregistered handset into the
charger. The handset screen displays
Registering... Please wait during
registration. The handset beeps once and
begins registering to the UP416 console.
It takes up to 60 seconds to complete
the registration. When the registration is
successful, the UP416 console shows
Handset registered.
NOTE: If the registration is not successful, the
console returns to the previous screen. To reset
the handset, remove the handset from the
charger. Wait for about two minutes, then try the
registration process again.
Choose Handset
in Registration
at base menu.
Put handset
on cradle to
register
Ringers
Set Date/time
One Touch
Phone Settings
System Setup
>Registration
Customer Support
Registering
handset...
(Put handset on
cradle to start)
Registration
>Handset
DECT Headset
Deregistration