User`s manual

17
Prime line
Use this feature, also known as automatic line selection, to choose which line
is automatically selected each time you make an outside call. If you select
Auto, the console selects any available telephone line starting from Line 1.
To set the prime line:
When the console is idle, press MENU
/SELECT.
Press or to scroll to System Setup, then press
MENU/SELECT or /SKIP.
Press
or to scroll to Prime Line, then press
MENU/SELECT or /SKIP.
Press
or to choose the desired line, then press
MENU/SELECT or /SKIP. To exit without making
changes, press CANCEL.
NOTE: If you install less than four telephone line cords to the console and select Auto as
your Prime line setting, make sure you plug in your telephone line cords starting from L1/2
jack. Avoid having any unoccupied telephone jack between other occupied telephone jacks.
Line group
You can set an extension or several extensions to receive the incoming calls
from a specific telephone line. Other non-selected extensions will not ring when
there is an incoming call from that specific line.
When the console is idle, press MENU/SELECT.
Press
or to scroll to System Setup, then press
MENU/SELECT or /SKIP.
Press
or to scroll to Line Group, then press
MENU/SELECT or /SKIP.
Press or to choose the desired line and then
press MENU/SELECT or /SKIP.
The screen displays Set Ext to Ring. Press
or
to scroll to the desired extension, then press
MENU/SELECT. Repeat this
step until all desired extensions are selected.
The extensions marked with a tick will ring when there is an incoming call
from the line chosen in Step 4.
The extensions not marked with a tick do not ring when there is an
incoming call from the line chosen in Step 4, unless the caller specifically
tries to reach the extension through the auto attendant.
Press or to scroll to Done, then press MENU/SELECT to save the
setting. To exit without making changes, press CANCEL.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
Prime Line
>Line 1
Line 2
Line 3
Line 4
Auto
Set Ext to Ring
Done
>Reception 12
9
HR DEPT 13 9
MKT DEPT 14
Ext 25 15
Ext 26 16
Getting started
System setup