User`s manual

33
Caller ID
Caller ID operation
Save a caller ID entry to the directory (continued)
Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services.
Press
or to choose Send tone, then press MENU/SELECT. A T
appears on the screen. All numbers you enter after this will send touch-
tone signals during dialing.
You can store the flash signal required by some special services as part
of a dialing sequence. Press
or to choose Add flash, then press
MENU/SELECT. A F appears on the screen. Continue storing the number
as usual.
Press or to scroll to Done, then press MENU/SELECT. To exit without
making changes, press CANCEL.
NOTE: You will need to change how a caller ID number is dialed if the entry does not appear
in the correct format. Caller ID numbers might appear with an area code that might not be
necessary for local calls, or without a 1 that might be necessary for long distance calls.
Delete entries
To delete a call history entry:
When in the caller ID history, press or to
scroll to the number you wish to delete.
Press DELETE to delete the shown entry from
the caller ID history.
The screen displays Caller ID deleted.
-OR-
When in the caller ID history, press or to
scroll to the desired number you wish to delete.
Press MENU/SELECT, then press or to
choose Delete.
Press MENU/SELECT, the screen displays
Caller ID deleted.
To delete all caller ID history entries:
When the console is idle, press CALL HISTORY.
2. Press DELETE. The screen displays All calls history deleted.
•
•
5.
1.
2.
3.
1.
2.
3.
1.
8005959511
Copy to DIR
Copy to 1-touch
>Delete
NEW 001/090
L1