User Guide

58
59
block list or allow list. It also checks
whether the caller name is in
the star name list. After that, The
telephone then displays the caller
ID information or “Blocked call”
accordingly. You can press
or
to take the new call.
• While the telephone is screening
a home call, the new call will be
ignored and logged as missed call
in the caller ID log.
• Robocalls are unable to respond
to the screening announcement,
and therefore, will not get through
and ring. If you want to allow some
robocalls to get through, save their
names in the star name list.
• The telephone can respond to remote
access code while it is playing the
screening announcement. This allows
you to access your answering system
from an unknown number remotely.
Screened call options
After the telephone screen a home call
and starts ringing, the handset screen
displays Screened call. Press
o r
to pick up the call.
After you picked up the call, the
telephone announces “Call from...” and
the caller’s name, and then announces,
“To answer the call, press 1. To answer
and always allow this number, press 2.
To block this number, press 3. To send this
call to the answering system, press 4. To
repeat these options, press *”.
Allow this call once:
Press 1 to answer the call. The telephone
number will not be added to your allow
list.
Always allow this call:
• Press 2 to answer the call. The
telephone number will be added to
your allow list.
Block this call:
Press 3 or CALL BLOCK to block the
call. The telephone plays the block
announcement “The number you are
calling is not accepting your call. Please
hang up.” to the caller.
Send this call to the answering system:
Press 4 to forward the call to the
answering system.
End this call:
If you do not want to take the call, press
to end the call.
NOTES
• For home calls that are “out of area”,
“Private”, or without caller ID, only
options 1 and 4 will be available.
The telephone announces “To
answer the call, press 1. To send this
call to the answering system, press
4. To repeat these options, press *”.
• If you select option 4 to send the
call to the answering system, the
caller can leave a message even if
the answering system is off.
• When the telephone is ringing, you
can press MUTE/DELETE to mute
the ringer temporarily.
Block calls | Call block list
Add a call block entry
1. Press MENU/SELECT to enter the
main menu when it is not in use.
2. Press p/q to scroll to Smart call blk,
then press MENU/SELECT.
3. Press p/q to scroll to Block list, and
then press MENU/SELECT.
4. Press p/q to scroll to Add new
entry, then press MENU/SELECT.
5. When the screen displays Enter
number, use the dialing keys to enter
a number (up to 30 digits).
• Press p/q to move the cursor to
the left or right.
• Press MUTE/DELETE on the
handset to erase a digit.
• Press and hold MUTE/DELETE on
the handset to erase all digits.
• Press and hold REDIAL/PAUSE
to enter a three-second dialing
pause (a P appears).
-OR-
Copy a number from the redial list by
pressing REDIAL/PAUSE. Then, press
p/q or REDIAL/PAUSE repeatedly
to find the desired number. Press
MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to
the name.
• The screen shows Number
repeated if the number is already
in the block list. You cannot save
the same number twice.
7. When the screen displays Enter