User Guide

76
77
Set QUIET mode
When QUIET mode is turned on, the
telephone silences all sounds during the
set period of time (1-12 hours). However,
the handset locator paging tone and any
sound-generating operations initiated
by users, such as making calls using the
speakerphone or setting ringer volume,
will sound as normal. After you turn
on QUIET mode, this feature activates
immediately and the answering system
turns on automatically.
When QUIET mode is on, the answering
system takes calls and records messages
without broadcasting them.
To turn QUIET mode on
1. Press and hold QUIET # in idle mode
to enter the QUIET mode setting
screen. The screen shows Quiet: _ _
hours [1-12].
2. Use the dialing keys to enter the
desired number of hours (1-12) you
would like to turn on QUIET mode,
then press MENU/SELECT. Your
screen shows Quiet mode on.
To turn QUIET mode off
While QUIET mode is on, press and hold
QUIET # . The screen shows Quiet mode
off briefly and then returns to idle.
NOTES
• If you change the base ringer, handset
ringer, ringer volume, or key tone
when QUIET mode is on, the sample
plays but the feature is still muted after
saving the setting.
• After QUIET mode is turned off or
the set period of time has expired,
all muted features will be activated
again.
• When QUIET mode is on, and Smart
call blocker is on and in screening
mode, all screened home calls will
be sent to the answering system after
screening.
Set listening volume
While on a call or message playback, you
can adjust the listening volume on the
handset or telephone base.
If it is a cell call and the volume is too loud,
too quiet or drops out, try changing the
volume on your cell phone. On some
cell phones, changing the volume on the
cell phone affects your cell call volume
on the VS112-17/VS112-27/VS112-37/
VS112-47 handsets.
To adjust the listening volume of a
handset
• Press p/q on the handset while on
a call.
To adjust the listening volume of the
telephone base
• Press - VOL + while listening to the
message playback on the telephone
base.
Set key tone
The handset is set to beep with each key
press. You can adjust the key tone volume
or turn it off.
If you turn off the key tone, there are no
beeps when you press keys.
To set the key tone
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Settings,
then press MENU/SELECT.
3. Press p/q to highlight Key tone,
then press MENU/SELECT.
4. Press p/q to select On or Off.
5. Press MENU/SELECT to confirm.
Voicemail settings
Set speed dial voicemail number
This feature lets you save your voicemail
number for quick access when you
press and hold the
key.
To set your voicemail number
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Settings,
then press MENU/SELECT.
3. Press p/q to highlight Voicemail #,
then press MENU/SELECT.
4. Use the dialing keys to enter the
voicemail access number (up to 30
digits) provided by your telephone
service provider.
• Press p/q to move the cursor to
the left or right.
• Press MUTE/DELETE on the
handset to erase a digit.
• Press and hold MUTE/DELETE on
the handset to erase all digits.
• Press and hold REDIAL/PAUSE
to enter a three-second dialing
pause (a P appears).
5. Press MENU/SELECT to confirm.
Add and register handset
You can add new VS112-17/VS112-
27/VS112-37/VS112-47 handsets
(purchased separately) to your VS112/
VS112-2/VS112-3/VS112-4 telephone
system. Your telephone system
supports a maximum of 5 handsets.
Each handset must be registered with
the telephone base before use. When
first purchased, each expansion handset
displays To register HS... and ... see
manual alternately.
NOTES
• Charge the new handset without
interruption for at least 30 minutes
before registering it to the telephone
base.
• You cannot register a handset if any
other system handset is in use.
To register a handset to VS112/VS112-
2/VS112-3/VS112-4 telephone base
1. Put the handset you wish to register
on the telephone base cradle.
2. The handset shows Registering....
If the registration is successful, the
handset screen displays Registered
and beeps. The handset is now
registered with the telephone base.