DIGITAL 900Ml CORDLESS Pl ONE MODEL VT 19. f 1vrm VTECH COMMUNICATIONS LTD. Is a trademark of VTECH COMMUNICATIONS LTD... a member of THE VTECH GROUP OF COMPANIES. DIGITAL 9OOMHZ CALLER 10 MODEL VT 191 1 Distributedin the U.S.A. by VTECH Communications, 11035 SW 11th Street Bldg,B. Suit 270 Beaverton, OR, 97005. Distributed in Canada by VTECH Electronics Canada Ltd., Suite 200 7671 Alderbridge Way Richmond, B.C. V6X 1Z9. - Copyright 1996 for VTECH COMMUNICATIONS LTD..
Page ............................................................................................................... 1 .............................................................................................................. 2 ............................................................................................................... 3 FCC 4 ........................................................................7 ..................................................................................
Congratulations! You have purchased one of the most sophisticated cordless telephones on the market! The VTech VT 1911 has been designed to offer a new standard in cordless telephone technology. Unlike most other cordless phones, the VTech VT 1911 digitizes your voice using advanced ADPCM digital voice coding to provide noise and distortion free performance. In most conditions you will not be able to tell you are using a cordless phone.
Parts Check List 1. Base unit, Handset and AC adapter 2. One-Line Telephone Cord 3. Battery Pack 4. Wall mount accessory To purchase replacement battery packs, call VTECH Communications at 1-800-624-5688. In Canada, call VTECH Electronics at 1-800-2677377. complies with Parts 15 Communications !: A label is 16catedon the underside of the base h i t containing the FCC registration ?umber and Ringer Equivalence Num er (REN). You must, upon request, p ovide this information to your local. glephone company.
I" Your telephone company may discontinue your service if your equipment causes harm to the telephone network. They will notify you in advance of disconnection, if possible. During notification, you will be informed of your right to file a complaint with the FCC. Occasionally, your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the operation of your equipment.
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read a n d instructions. 7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. understand all 2. Follow all warnings and instructions marked on the product. 3.
Charging' the handset batteries The handset of your VTech VT 1911 cordless telephone is powered by a rechargeable battery pack. It charges automatically whenever the handset is in the base. You should charge the battery pack for 16 hours when you first receive your phone. You'll know the battery pack needs charging when: The phone beeps when you press the PHONE key.
Check fo$ a dial tone. After the batteries 'ire charged, pick up the handset. ow press PHONE on the handset. "PHONE ON" will appear on the LCD, a"d vou will hear a dial tone. If not, see on page : Setting Up Your VTech VT1911 1. Choose an area near an electrical outlet and a telephone wall jack. b 2. Connect your telephone Line Cord. AC Power Adapter Plug the AC power adapter into an electrical outlet and the DC connector to the back of the base unit.
U S I N G THE W A L L M O U N T ADAPTOR 1. Position the wall mount bracket on the base. Line up the tabs on the wall mount adaptor with the holes on the bottom of the base (Figure 1). Snap the wall mount bracket firmly in place. 2. Mount the base on the wall. Position the base so the mounting studs will fit into the holes on the bottom of the base. Position the power cord to extend down the wall the phone is to be mounted on. Slide the base down on the mounting studs until it locks into place.
THE HANDSET FEATURES THE BASE FEATURES ANTENNA AC POWER J A PHONE CORD JACK C TONEIPULSE SELECTOR 1 VOLUME UP & DOWN BATTERY COMPARTMENT LCD DISPLAY HOLD OFF KEY PHONE KEY 1 7 DIALING KEYS (0-9) TONE (Temporary Tone) REDIAL CALLER ID MUTE CLEAR 1 DELETE PROGRAM MEMORY CHARGING CONTACTS \ \ ANTENNA POWER INDICATOR IN USE INDICATOR CHARGING INDICATOR SPARE BATT INDICATOR PAGE KEY - MEMORY DIALING CARD SPARE BATTERY CHARGING COMPARTMENT CHARGING CONTACTS K ]
Here's a brief guide to the features and functions of your VTech VT 1911 cordless telephone: TO MUTE A CALL Press (WE on) the handset to disable the handset microphone. SET-UP Connect telephone line cord to base unit and telephone jack. Press ( EE again to ) return to normal operation. Plug AC adapter into a standard electrical outlet Set Dial Mode switch to PULSE or TONE. The unit is factory set to TONE. Let handset battery pack charge for 16 hours before first use.
I!'. MAKING CALLS You can make calls directly from the handset whether you are at the base or away from it. NOTE: There are two different ways t o dial a number: 1. Press theE )-( key and wait for dial tone. Then dial the number you want. 2. Enter the number onto the display first, then press the (PHONE) key. This will dial the number that is displayed on the LCD after 2 seconds.
The handset LCD will show the ringer type selected: Press or @ to exit. Turning Off The Ringer To turn off the ringer do the followin!: TURNING OFF THE RINGER CLWDEL Key Function The CLEAR and DELETE functions can be accessed separately depending on how long the key is held down. For example, to clear the last di it entered on the display, press thef-0 key for less than 1 second. Press and hold the @LR/DEL) key for more than 1 second to completely clear the LCD.
Dialing From Memory Press ( P ~ E )to get a line. Press , you're prompted to enter a speed dial location number: Enter a 2 digit location number (01-20) The number stored in that location will be displayed and immediately dialed. 0r from standby mode, Fr%,"&followed by a 2 digit location number (01-20). Press m a g a i n to exit mem mode and leave the number on the display.
I . 'I\ ,, - CID CALLER ID Your VTech VT 1911 cordless phone is capable of displaying the name or phone number of the person calling, before you answer the phone. Subscriptionto Caller ID servicethrough your local phone company is required to utilize this feature. If you subscribe to alphanumeric (name & number) Caller ID service, the calling party's name (when available) will be displayed on the LCD screen while the phone is ringing.
Reviewing Numbers Calls stored in memo can be reviewed by pressing The display will show the number of the most recent call. The top line of the display is used to indicate the memory location number and the bottom line of the display shows the name, see below: b. There may be additional characters in the name which can not be shown on the current display. Press the A ( 9 ) key.
d' TAKING ?CARE OF YOUR TELEPHONE. Your VTqch VT 191 1 cordless telephone. contains sophisticated electronic parts, so it must be treated with care. NOISE OR INTERFERENCE Your VTech VT 1911 cordless telephone has auto-channel scan circuitry which will detect excess noise and change the channel of the phone to reduce it. This is done automatically. Since the VTech VT 1911 is a fully digital phone, it does not suffer from noise associated with regular cordless phones.
f If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTECH Communications at 1-800-624-5688. In Canada, call VTECH Electronics at 604-273-5131. THE PHONE DOESN'T WORK AT ALL. Make sure the Power Cord is pugged Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall jack. Make sure the batteries are properly charged.
FREQUENCY CONTROL Crystal Controlled Dual P L L Synthesizer WEIGHT Handset : 250 grams Base : 415 grams TRANSMIT FREQUENCY Handset : 925.05 MHz to 927.75 MHz ( All ten channels within this range) POWER REQUIREMENTS Handset: Self-contained nickelcadmium rechargeable battery supply, 3.6V nominal, 6OOmAh capacity. LIMITED WARRANTY VTECH Communications warrants, to the original purchaser only, the material and workmanship of this product for ONE YEAR from the date of purchase.
