Specifications
NOISE OR INTERFERENCE
Your VTech VT
1911
cordless
telephone has auto-channel scan
circuitry which will detect excess noise
and change the channel of the phone
to reduce it. This is done automatically.
Since the VTech VT 1911 is a fully
digital phone, it does not suffer from
noise associated with regular cordless
phones. At times you may experience
occasional "drop outs" especially at the
extreme edges of the phone's range.
Simply move closer to the base unit
and this will disappear.
AUTOMATIC SECURITY CODING
Your VTech
VT 191 1 phone is factory
set with
16.8
million possible security
codes. This unique security code
allows your handset and base to
recognize each other, and minimizes
the possibility of another cordless
phone using your telephone line.
OUT OF RANGE INDICATION
If
the handset is moved to a point where
the base and handset can no longer
communicate, the handset will make a
quick series of beeps to signal Out of
Range.
If the handset is active when taken
out-of-range, it will beep twice a
second and enter standby mode after
25 seconds if the link is not
reestablished. If the handset is
brought back within range, it will
automatically re-link.
For out-of-range in standby mode, the
handset will beep once and then at 15
second intervals, will display
"CHANNEL SERACHING" on the
LCD,
and scan all channels in an
attempt to re-link with the base.
OUT OF RANGE WHEN PHONE IS
ON
If you are presently engaged in a phone
conversation move closer to the base.
If the base unit does not communicate
with the handset within 25 seconds of
losing contact, it will automatically
hang up.
OUT OF RANGE WHEN PHONE IS
OFF
If the phone is OFF, the handset and
base still monitor each other to make
sure that they can communicate.
If
the
handset is moved out of range, the
handset will make a series of beeps,
and will then display "CHANNEL
SERACHING" on the LCD. At 15
second intervals the handset will scan
all channels in an attempt to reestablish
communication with the base. This
process does not require user
intervention; the handset will re-link
with the base automatically once it is
brought back within range. The unit
will then be able to receive and place
calls.
When the base unit is unplugged from
the power supply, the handset will give
the "Out of Range" warning beep. Plug
the base in again and this will stop.
d'
TAKING ?CARE OF YOUR TEL-
EPHONE.
Your
VTqch VT 191 1 cordless
telephone. contains sophisticated
electronic parts, so it must be treated
with
care.
Avoid rouph treatment
Place the handset down gently. Save
the original packing materials to protect
your telephone if you ever need
to ship it.
I
Avoid water
Your telephone can be damaged if it
gets wet. Do not use the handset
outdoors in the rain, or handle it with
wet hands. Do not install your base
unit near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause
power surges harmful to electronic
equipment.
For your own safety, use caution when
using
elec ic appliances during storms.
*rw"
"-....
.
.
.
.
.
..--
-
-
..
.
. .
.
.
Cleaning your telephone
.
'
Your telephone has a durable plastic
casing that should retain its luster for
many years. Clean it only with a soft
cloth slightly dampened with water or
a mild soap. Do not use excess water
or cleaning solvents of any kind.
Remember that electrical appliances
can cause serious injury if used when
you are wet or standing in water. If
your base unit should fall into water,
DO NOT RETRIEVE IT UNTIL YOU
UNPLUG THE POWER CORD AND
TELEPHONE
LINE CORDS FROM
THE WALL. Then pull the unit out by
the unplugged cords.