Specifications

Setting Up Your VTech VT1911
1. Choose an area near an electrical
outlet and a telephone wall jack.
2. Connect your telephone Line Cord.
AC Power Adapter
Plug the AC power adapter into an
electrical outlet and the DC connector
to the back of the base unit.
TELEPHONE
WALL JACK
SElTlNG UPYOUR
VT191oc I I
1 AC
OUTLET
A CAUTION:
Use CLASS 2 POWER SUPPLY
ONLY and use
9V DC.
Handset Ringer
The handset ringer is programmed ON
as the factory default setting. Refer to
PROGRAMMING
THE RINGER on
page
21 for more information.
Setting the TonelPulse Switch
The
TONEIPULSE switch is located on
the bottom of the base unit and is
factory set to TONE. If you have touch
tone service, do not change the switch
setting. If you have rotary (Pulse)
service, set the switch to PULSE.
-TONE PULSE
SELECTION
Charge the handset battery pack
before use. The battery pack recharges
automatically whenever the handset is
in the base unit. The batteries must
be charged for
16 hours before using
your phone for the first time.
CHARGE THE
HANDSET
BAlTERY PACK
FOR 16 HOURS
BEFORE
USING
Fill in the telephone number card on
le base unit.
Check fo$
a dial tone. After the
batteries 'ire charged, pick up the
handset.
b ow press PHONE on the
handset. "PHONE ON" will appear on
the LCD, a"d vou will hear a dial tone.
If not, see
on page :
CAUTION
1. Never
during
2. Never i
locatic
specif
locatio~
3. Never,
wires
telepl
discor
interfac
/
4. Use c
modify
Istall telephone wiring
lightning storm.
tall telephone jacks in wet
s unless the jack is
ally designed for wet
~ch uninsulated telephone
. terminals unless the
ne line has been
ected at the network
tion when installing or
9 telephone lines.