Operating instructions

19
HEADSET OPERATIONS
Your VTech cordless phone is equipped
with a 2.5mm headset Jack for use with
an optional accessory Headset for
hands-free operation.
If you choose to use the Headset option,
you must obtain an optional accessory
Headset, which is compatible with the
VTech cordless phone.
To purchase a Headset, call VTech Cus-
tomer Service at 1-800-595-9511. In
Canada, call VTECH Electronics at 1-
800-267-7377.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on the
VTech cordless phone Handset. Con-
nect the plug on the Headset cord to the
jack on the cordless Handset. The plug
should fit securely. Do not force the con-
nection.
OPERATION
NOTE: Whenever a compatible Head-
set is connected to the cordless Hand-
set, the microphone on the Handset will
be muted. This is done to limit the effect of
background noise.
The following operational characteristics
also apply to other headsets which are
not sold by VTech; however, VTech as-
sumes no responsibility for their perfor-
mance.
The VTech compatible Headset has a
reversible, monaural design. You can
wear you Headset on either ear, leaving
one ear free for room conversation.
The headband can be adjusted to fit the
contour of you head. Using both hands,
slide the headband up or down so that it
rests
comfortably on your head, with the
speaker cushion centered against your
ear.
For maximum sound quality, the flexible
microphone should be positioned at the
corner of your mouth, about one inch from
your face.
BELT CLIP
The VTech cordless phone is also
equipped with a detachable belt clip.
Align the pins on the inside edge of the
clip with the notches on the sides of the
VTech cordless phone Handset. The belt
clip should snap securely into place.Do
not force the connection.