User`s manual

Step 2. Plug in the Cords
CAUTION
To Mount on a Wall:
Use only the AC adapter supplied with this telephone.
Adapter Model number : VT9125
Input : 120V 60Hz
Output : 9V DC 400mA
Polarity : Center Positive
Incorrect polarity or voltage can seriously damage the unit.
DC 9V
When you mount the phone on a wall, be
sure that the AC adapter can easily
reach a wall outlet.
1. Insert the hooks of the bracket into the
holes in the bottom half of the base.
2. Push the bracket in the direction of
arrows shown.
5. Plug the AC adapter tip into the
jack on the base. Be sure that the tip
is securely plugged into the jack.
6. Take the large end of the AC adapter
and plug it into a wall outlet. Be sure
that the wall outlet is not controlled by
a light switch.
7. Align the two holes in the bracket over
the wallplate posts.
8. Slide the phone down until the phone
is securely seated.
3. Take the phone cord and plug it
into the jack marked on the
base.
4. Plug the other end of the phone cord
into the wall outlet. (the wall plate is
not supplied with this unit.)
TELCO
- 5 -