Operating instructions

11
HANDSET FEATURES
INT.COM/LOW BATT
900 MHz
CORDLESS
PHONE
CHAN
OFF
FLASH
2ABC13DEF
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
TONE
0
OPER
HOLD
PRV
INT.COM
PGM
MEM REDIAL
PAUSE
CHAN KEY
INT.COM KEY
MEM KEY
PRV KEY
During a call, press the
PRV key to prevent the
base unit (speakerphone)
from joining the
conversation. Press the
PRV key a second time
to cancel PRV mode.
*
TONE/* KEY
In TONE dialing mode,
this key is used as a
normal number key.
In PULSE dialing mode,
this key is used to switch
to Temporary TONE
dialing mode.
REDIAL/PAUSE KEY
PGM KEY
*
INT.COM/LOW
BATT LED
PHONE KEY
Press this key to make
a call.
Press this key during a
call to flash the line.
*
Pressing the CHAN key
when the handset is in use
will activate a channel
change to the next free
channel. This is used if you
are experiencing noise or
interference on the current
channel.
OFF KEY
During Speed Dial
programming, press this key to
insert a 2 second PAUSE in the
dialing sequence.
*
Press this key to exit
all modes.
*
Press this key to enter
memory dial mode.
In handset idle mode,
press this key to enter
PROGRAM mode.
It will illuminate while
using Intercom.
It will flash slowly if
Handset battery level is
low.
*
*
*
VOLUME SWITCH
Set earpiece volume
to HIGH, MEDIUM or
LOW, depending on
your preference.
Press this key to dial the last
number called on your phone.
HEADSET JACK
Connect a 2.5mm
headset to the jack for
hands free operation.
*
*
*
*
*
HOLD KEY
When the handset is in
use, press this key to
hold the line. To release
the hold mode, press
the PHONE key.
*
*
*
Press this key will ring
the base to establish an
intercom call.