User's Manual

ManualsBrandsVTech ManualsHandheld Game SystemVTech VTech Handheld Game System v-motion active learning system

For TVs with a mono audio input:

- Connect the yellow plug on the

V-Motion

cable to the

yellow video input terminal on your TV.

- Connect the white or red plug on the

V-Motion

cable to

the white or red audio input terminal on your TV.

Connecting to a VCRConnecting to a VCR

If there is no video IN and audio IN terminal on your TV set, you can connect

V-Motion

to a VCR.

- Connect the yellow plug on the

V-Motion

cable to the yellow

video input terminal on your VCR.

- Connect the white and red plugs on the

V-Motion

cable to

the white and red audio input terminals on your VCR.

To Begin PlayTo Begin Play

V-Motion

Console

• Make sure the unit is turned OFF.

• Insert a

Smartridge™ into the Smartridge™ slot on the front of the main unit.

The Smartridge™ should lock into place. Please use care when removing the

Smartridge™ from the slot.

• Turn on the TV.

• Set your TV input mode to accept input from the port to which

V-Motion

connected. In many cases this will involve setting the TV to “video” mode; however,

since all TVs vary, please refer to your TV or VCR manual for further details.

• Turn the

V-Motion

Active Learning System on by pressing the ON/RESTART

Button.

Notice:

V-Motion

can play both

V-Motion

and V.SMILE

Smartridges™.

1. Keep your

V-Motion

clean by wiping it with a slightly damp cloth. Never use solvents

or abrasives.

2. Keep it out of direct sunlight and away from direct sources of heat.

3. Remove the batteries when not using it for an extended period of time.

4. Avoid dropping it. NEVER try to dismantle it.

5. Always keep the

V-Motion

away from water.

6. The AC adaptor should be regularly examined for damage to the cord, plug, enclosure

and other parts. In the event of such damage, the

V-Motion

must not be used with

this adaptor until the damage has been repaired.

CAUTION-Adequate Space Required

Be sure you have enough space around you during

game play. To avoid injury or damage, make sure

other people or objects are not within your range

of motion.

For best results, put the

V-Motion

console in front of the TV. Then align

the center of the

V-Motion

console

with the center of the TV.

• For best results, put the

V-Motion

console in front of the TV. Then align the

center of the

V-Motion

console with the center of the TV.

• Avoid blocking the signal between the

V-Motion

console and wireless controller.

• The optimal distance between the

V-Motion

console and wireless controller is

three to 15 feet.

• Avoid having bright light sources, including sunlight, that shine behind or near the TV

toward the controller.

• Avoid having other radio-frequency devices in the game play area.

• Avoid putting the

V-Motion

console on a metal table or near metal objects.

Using the

V-MOtION

Wireless ControllerUsing the

V-MOtION

Wireless Controller

Make sure all players wear the wrist strap securely on their wrist and hold the controller with

both hands during play.

The recommended distance between the

V-Motion

console and wireless controller is three to 15 feet.

7 8 9 10 11 12 13

Note : The

V-Motion

wireless controller is not compatible with the original

V.Smile

TV Learning System.

Using the

V-Motion

Wireless Controller

How to Attach the Wrist Strap to the Controller

• Locate the wrist strap attachment on the bottom of the controller. Attach the wrist strap

through the hole. (Figure 1)

• Place your hand through the wrist strap, so that the strap ﬁts comfortably on your wrist.

Hold the controller ﬁrmly in your hands while playing. (Figure 2)

Connecting to the Console - One-Player Mode

• Locate the OFF/Player 1/Player 2 Switch on the bottom of the controller. Move the

switch to Player 1. (Figure 3)

• Make sure the controller’s Motion Sensor Signal is directly facing the

V-Motion

console . (Figure 4)

• When the direction lights and the light on the

V-Motion

console stop blinking, the

connection is complete. (Figure 5)

• Move the OFF/Player 1/Player 2 Switch to OFF when controller is not in use. (Figure 6)

Connecting to the Console - Two-Player Mode

• Locate the OFF/Player 1/Player 2 Switch on the bottom of the controller. Move the switch

to Player 2. (Figure 7)

• Repeat the steps above to be sure the controller is connected for Player 2.

Connect V.SMILE

Accessories or Wired Controller to

V-Motion

Pull down the rubber ﬂap on the front of the

V-Motion

console. Plug the V.SMILE

accessory or controller into the port.

Note: When both a

V-Motion

wireless controller and a V.SMILE

wired controller or

accessory are connected, the wired unit will register as Player 1. Please set the wireless

controller to Player 2.

CAUTION

WEAR THE WRIST STRAP WHEN USING THE

V-Motion

CONTROLLER.

• Make sure all players use the wrist strap.

• When sharing the

V-Motion

CONTROLLER among multiple players, make sure each person uses the wrist

strap properly.

• Wearing the wrist strap will prevent you from accidentally dropping or throwing the controller during game play,

which could damage the controller or surrounding objects, or cause injury to other people.

ALLOW ADEQUATE SPACE AROUND YOU DURING GAME PLAY

• Adequate space is required during game play. Stay at least 15 feet away from the TV.

• As you move around during game play, make sure objects and other people are out of your range of movement to

prevent damage or injury.

DO NOT LET GO OF THE

V-Motion

CONTROLLER DURING GAME PLAY

• Read the user’s manual booklet for the game you are playing and follow all game control instructions for correct

use of the

V-Motion

controller or accessories.

• Hold the controller securely and avoid excessive motion, as it may cause you to let go of the controller and may

break the wrist strap.

• If your hands become moist, stop and dry your hands.

CAUTION : Use the Wrist Strap

Basic Operations

The following demonstrates the basic operations of the

V-Motion

wireless

controller. Operations will vary per game. Read the Smartridge™ user’s manual for the

game you are playing, and follow its instructions.

(Figure 2)

(Figure 3) (Figure 4) (Figure 5) (Figure 6)

(Figure 1)

(Figure 7)

• Insert the V.Link

into the V.Link

port. Be sure the sliding

button side of the V.Link

is facing up for proper placement.

• The

V.Link

’s green indicator light will turn on to let you know the

V.Link

is transferring information.

• For more details, please see the

V.Link

User’s Manual.

WARNING

A very small percentage of the public, due to an existing condition, may experience epileptic

seizures or momentary loss of consciousness when viewing certain types of ashing colors or

patterns, especially on television. While the

V-Motion

does not contribute to any additional

risks, we do recommend that parents supervise their children while they play video games.

If your child experiences dizziness, altered vision, disorientation, or convulsions, discontinue

use immediately and consult your physician.

Please note that focusing on a television and LCD screen at close range and handling joystick

controls for a prolonged period of time may cause fatigue or discomfort. We recommend that

children take a 15 minute break for every hour of play.

For Best Results While Playing GamesFor Best Results While Playing Games

2008 © VTech

Printed in China

91-002299-000-000

Yellow White Red

CARE & MAINTENANCE

TROUBLE SHOOTING

Disclaimer and Limitation of Liability

VTech

Electronics North America, L.L.C. and its suppliers assume no responsibility for any damage

or loss resulting from the use of this handbook.

VTech

Electronics North America, L.L.C. and its

suppliers assume no responsibility for any loss or claims by third parties that may arise through

the use of this software.

VTech

Electronics North America, L.L.C. and its suppliers assume no

responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead

battery, or repairs. Be sure to make backup copies of important data on other media to protect

against data loss.

Company:

VTech

Electronics North America, L.L.C.

Address: 1155 West Dundee Road, Suite 130, Arlington Heights, IL 60004 USA

Phone : 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada

NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However , there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution : changes or modiﬁcations not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

OTHER INFO

V-MOtION

PLAY GUIDELINES

V-MOtION

PLAY GUIDELINES

Drive

Tilt the controller forward or backward.

TECHNICAL SUPPORT

If you have a problem that cannot be solved by using this manual, we encourage you to visit us

online or contact our Consumer Services Department with any problems and/or suggestions that

you might have. A support representative will be happy to assist you.

Before requesting support, please be ready to provide or include the information below:

• The name of your product or model number (the model number is typically located on the back

or bottom of your product).

• The actual problem you are experiencing.

• The actions you took right before the problem occurred.

Internet :

www.vtechkids.com

Phone : 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada

Move the controller from bottom to top.

Tilt the controller right or left.

Shake the controller from side-to-side.