Instructions / Assembly

For more detailed user’s guide,
Please visit www.eesgi.com
Version 1.2
2016 EE Systems Group Inc. (USA)
All rights reserved
App Store Android
Important
1.Indoor Music Chime is designed for indoor/local use only.
2.Do not mount the VueBell unit close to any metal surface or UPVC doorframes; otherwise it will reduce
the operating range.
3. Do not expose the unit to rain directly, or immerse the unit into water.
4. Do not mount the unit close to fireplace or expose the unit to extreme temperature.
Once users have successfully installed and enabled corresponding features, users are considered to
understand and acknowledge all functions (includes but not restricted to camera, audio, and live
video). EE Systems Group Inc. (USA) is not responsible of any legal disputes related to information
recorded and/or stored by its products.
Disclaimer and Waiver of Liability
QUICK START GUIDE
Internet Video Doorbell
VueBell APP introduction
Add unit in VueBell account
07 08
09 10
⑨
Wait for the VueBell to
connect with network
⑩
After successfully connected
with the network, the information
of the device will appear,
including the ID number,
the device name and the firmware.
Click “Add” button to confirm and
add the device under your account.
⑤
Get into WiFi
⑥
Press RESET button on back
of this unit to start the VueBell
networking connection
⑦
User then needs to scan
the QR code by using your
VueBell’s camera
⑧
A QR code will be generated
on your smart device immediately
8-15cm
②① ③ ④
Registration and log in Press + to add VueBell Connect VueBell with
AC DC power supply
Make sure all the devices in
the same network
②① ③
②
①
③
Mine:
All VueBells listed in this account.
Smart Guard: The snapshoots of
this function under events' list
Friends: The VueBells which
your friends shared with you
Volume Adjustment
There is a volume button at right side of the Indoor Music Chime. Press it to adjust the sound volume to be
high, medium and low.
User Hints
If the Indoor Music Chime does not sound, please check the following:
-Flat batteries in Indoor Music Chime or change the batteries.
-Wrong battery polarity in Indoor Music Chime, just reinsert the batteries.
-Units are out of range-Operate the Indoor Music Chime within the operation range.
What is Auto-learning Code?
The VueBell unit sends wireless signal to the Indoor Music Chime. The Indoor Music Chime would
automatically register and memorize the signal as an operation code. So the VueBell unit can work with the
Indoor Music Chime by this code.
Auto-learning Code Set Up
The Indoor Music Chime is equipped with auto-learning operation code ability.
1.Operation for 1 VueBell unit and 1 indoor Music Chime After power supply on VueBell unit and battery
installation on Indoor Music Chime, press the VueBell unit once to generate a new operation code. The
Indoor Music Chime will sound, which indicates that a new operation code is registered and memorized.
2.Operation for 2 VueBell units and 1 indoor Music Chime After power supply on the two VueBell units
firstly and then battery installation on Indoor Music Chime, press the push button on each VueBell unit
once within 15 seconds to generate new operation codes. The Indoor Music Chime will sound, which
indicates that two new operation codes are registered and memorized. This is the only way for the 2
VueBell units to work with the Indoor Music Chime. (If user press the push button on each VueBell unit after
15 seconds, only the first VueBell unit will generate a new operation code and the Indoor Music Chime will
sound to indicate the first operation code is registered and memorized.)
3.Interference from another Indoor Music Chime operating nearby (For example, Indoor Music Chime
sounds for no reason): Remove the batteries from the Indoor Music Chime and rest for 30 seconds, this
will erase the memory. Insert the batteries, and then the VueBell units and the Indoor Music Chime are
ready for the new code registration.
4.Operation for the 3rd / 4th / 5th VueBell units and the indoor Music Chime (There is 2 VueBell units
included):
(a)Remove the batteries from the Indoor
Music Chime and rest for 30 seconds, this will erase the memory.
(b) Load the batteries into Indoor
Music Chime , and the Indoor Music Chime is ready for the new code
registration.
(c) Press the
VueBell units once per each within 15 seconds, they will individually generate new operation
codes randomly and send wireless signals to the Indoor
Music Chime which will sound to indicate that new
operation codes are registered and memorized. (The Indoor
Music Chime has 15 seconds to learn maximum
5 operation codes after batteries are installed. If there is no operation code sent from
VueBell unit within 15
seconds, the Indoor
Music Chime would be only ready for 1 new code registration. It means, only the 1st
VueBell unit can work with 1 Indoor Music Chime after 15 seconds.)
(d) It is important to remember that when you replace the run-out batteries with new ones that you will need to
follow the same procedure of the auto-learning code set-up as above.