Instructions / Assembly

2
Installing the Sensors
Assembling the Chainring and Installing the Right Transmitter
Install the right transmitter on the right crank as you assemble the chainring. The Shimano FC-9000 is used as an example in
this explanation.
If the chainring and chainring adapter have been removed, assemble the chainring and fasten the right transmitter according to
the following procedure.
Refer to the instruction manual for the crank set you are using for the procedure to assemble the chainring.•
When you assemble the chainring, be careful that you do not scratch the crank with the pin that prevents the chain from falling off. Also,•
work safely by masking the teeth of the chainring and doing other things. Also, work safely by masking the teeth of the chainring and
doing other things.
FC-9000 FC-6800
1
Install the outer chainring on the spider arm.
Pin that prevents chain
from falling off
Install the right transmitter so it is on the outside of the chainring.•
Do not install the right transmitter on the inside of the chainring.