Service manual

6. Slip the element out of the clamps (clamps may require removal if turning them will not free the element

completely).

7. Pull the element through the top burner box outwards into the oven cavity and remove it from the appliance.

8. Install new element by reversing steps 1-7. (When installing a new element Do Not force or jam the

element into the holding clamps. Do Not force or jam the terminal ends through the oven cavity top mounting

holes. Force may damage the elements. The holding clamps can be removed if the element will not slip

easily into the clamp mounting slot.)

REPLACEMENT OF OVEN DOOR

1. Lower the kick panel.

2. Using a flat head screwdriver, pry up on both the left and right hand bell cranks (one at a time) until they

release from the bell crank hooks. Remove the hooks from the door arm. (Fig. 45)

Fig. 45

3. Open the oven door and remove the oven rack(s) and oven bottom.