Specifications

5
A
AB
ABC
ABCD
ABCDE
GR Series Fryer — Features
Model
Igniter
Fat Melt
Thermostat Basket Lift(s)
Basket(s)
Pilot Electronic
Cycle
Twin Single Tri
GRS25, N/A Std. N/A
GRS35, GRS45, Std. Opt. Opt. Mechanical Opt. Std. Opt. N/A
GRS65, GRS85 Std. Opt. Opt.
GRD25, N/A Std. N/A
GRD35, GRD45, Std. Opt. Std. Solid State Opt. Std. Opt. N/A
GRD65, GRD85 Std. Opt. Opt.
GR Series Fryer — Construction Features
Battery Battery
Model Filter Ready
Configuration Interplumbing
GRS25, GRD25 Mobile Filter Not Available Std. Opt. with GR35, GR45,
GR65, GR85, R015 or R021
GRS35, GRD35 Opt. (Use MF50.) Opt. Opt.
GRS45, GRD45 Opt. (Use MF50.) Opt. Opt.
GRS65, GRD65 Opt. (Use MF85.) Opt. Opt.
GRS85, GRD85 Opt. (Use MF85.) Opt. Opt.
BATTERY CONFIGURATIONS
Batteries of up to five units wide can be configured with any GR Series Fryer or Frymate Dump Station (either
15
1
⁄2" or 21" wide). Possible configurations showing positions A through E are depicted below:
NOTES:
= Dump Station; = Fryer.
* Indicates filter interplumbing not available.
A filter dump station can be located under any position in a battery if it has been built without an RO Frymate.
A filter dump station can be located under any position in a battery if the line-up has been built with an RO
Frymate located at either end of the battery.
When an RO Frymate is built between two fryers within a battery, the filter dump station is located under the
RO Frymate.
In two-unit batteries utilizing an RO Frymate, the filter dump station will always be located under the fryer.
The GRS25 and GRD25 Fryers are not available as stand alone fryers or with filter dump stations. They are
available with filter interplumbing when batteried with GRS/GRD35, 45, 65 and 85 Fryers.
All options and accessories can be used with batteried equipment.