User Manual

10
VULTA BLIZZARD
Lock: Locking the flashlight prevents it from
accidentally turning on during storage or
transportation. Before locking the flashlight,
make sure the flashlight has been turned off for
at least seven seconds. Quickly press and then
press and hold the side button so the flashlight
turns on and then off. To unlock the flashlight,
quickly press and then press and hold the side
button until the flashlight turns on. Locking
the flashlight will not clear your current output
setting.
THE LANYARD
You can attach and wear the included lanyard
to help prevent accidental drops and to free up
a pocket. To attach the lanyard, clip it onto the
recessed lanyard eyelet in the flashlight’s tailcap.
O-RING MAINTENANCE
The Blizzard FS-B73R’s O-ring is installed on
the threaded portion to help seal out water. The
O-ring is prelubricated to extend its lifetime,
ensure smooth operation, and increase water
resistance. If the O-ring dries out or there is
little or no lubricant remaining, we recommend
applying a small amount of O-ring lubricant.