User Manual

VULTA BLIZZARD

A Note about Maximum Output

When the flashlight is in High mode, the

battery discharge, drive circuit, and LED will

all be producing heat, and the lamp head may

become extremely hot. Please be cautious

when touching it. To protect the battery,

circuit, and LED, and to extend the lifetime

of the flashlight, we do not recommend

continuously running the flashlight on High

mode for more than 10 minutes.

INSTALLING BATTERIES

The Blizzard FS-B73R is powered by three 18650

or six CR123 or RCR123 (3 or 3.7 V) batteries.

The batteries are inserted into the all-aluminum

battery carrier, which is housed in the flashlight's

grip. The battery carrier can be preloaded so it’s

always ready for use. To facilitate quick and easy

loads in low-light situations, the carrier can face

either direction when you insert it into the grip.

Note: Make sure to load the batteries with the

positive and negative terminals facing the proper

directions. When using rechargeable 18650

batteries, 2600 mAh capacity with an integrated

protection circuit is recommended.