User Manual

07
VULTA BLIZZARD
A Note about Maximum Output
When the flashlight is in High mode, the
battery discharge, drive circuit, and LED will
all be producing heat, and the lamp head may
become extremely hot. Please be cautious
when touching it. To protect the battery,
circuit, and LED, and to extend the lifetime
of the flashlight, we do not recommend
continuously running the flashlight on High
mode for more than 10 minutes.
INSTALLING BATTERIES
The Blizzard FS-E51 is powered by three
CR123 or RCR123 (3 or 3.7 V) batteries. The
batteries are inserted into the all-aluminum
battery carrier, which is housed in the
flashlight's grip. The battery carrier can be
preloaded so it’s always ready for use. To
facilitate quick and easy loads in low-light
situations, the carrier can face either direction
when you insert it into the grip.
Note: Make sure to load the batteries with
the positive and negative terminals facing the
proper directions.