User Manual

08
VULTA BLIZZARD
To install a battery, follow these steps:
1. Unscrew the lamp head from the grip and
remove the battery carrier.
2. Insert three fresh CR123 or RCR123
batteries into the battery carrier. Make sure
the batteries are facing the proper direction as
indicated by the markings in the carrier.
3. Insert the battery carrier into the grip.
4. Screw the lamp head onto the grip until
secure.
OPERATION
The Blizzard FS-E51 employs a variable-
control ring to turn on the flashlight, control
output power, and engage Strobe mode.
POWERING ON THE BLIZZARD FS-E51
To power on the FS-E51, rotate the variable-
control ring clockwise. The unit will emit light
immediately upon turning on.