Specifications


10
Date/Time Date and Time
 Year
 Month
 Date
 Hour
 Minute
Inst. Preview Instant preview
 On
 Off
Auto Off Auto Power Off
 Off
 3 Min
Delete All Delete All Files
 No
 Yes
Format
Format the microSD Memory Card
Note: All contents on microSD card
will be erased during formatting
 No
 Yes
Device Info Device Information /
4.8 How to Calibrate the Scanner
Note: If the scanned images are too dark or too bright, you may need to calibrate your scanner by adjusting the
white balance. Follow the below steps to perform calibration:
1. Remove the microSD card from the scanner.
2. Press and hold the
button to power on the scanner.
3. Press and hold
button. While holding the button, press the button and then release
both buttons to enter into auto-calibration mode. The message “1. Insert the calibration sheet.” will appear
on LCD screen.
4. Insert the calibration card as the arrows indicate with the text facing down. The scanner will start to scan
the calibration card. During the scanning process, it will stop and message “2. Calibration in progress!” will
appear. Wait for the scanner to continue to finish the scanning the rest of the calibration card.
5. “3. Calibration completed!” message will appear on the LCD screen when calibration is completed.
5.Connecting to Computer
View your scanned files on your comptuer
You may also connect your scanner to your computer and view pictures on the computer monitor
1. Press and hold
to turn on your scanner.
2. Connect your scanner to your computer and press
to enter USB mode.
3. Your computer will recognize the scanner as a “Removable Disk”. Click “Open
folder to view files” to view, import, copy, move or to delete scanned files.