Operating instructions

Page 21
IMPORTANT! YOU MUST RUN THE CHECK SWITCH AFTER SWITCHING TRIOS!
IMPORTANT! YOU MUST RUN THE CHECK SWITCH AFTER SWITCHING TRIOS!
Change to
the DISH HD Eastern Arc Trio (61.5, 72, 77)
1. On the VuQube controller, press and release the
ON button. Wait for the status light to flash orange,
and then W
AIT 4 MORE SECONDS.
2. Press and release the ON button 4 times.
The status light starts rapidly flashing green and red.
3. Press and hold the button for 4 seconds.
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF. GO TO PAGE 14 AND RUN THE CHECK SWITCH.
Change to
the DISH HD Western Arc Trio (110, 119, 129)
1. On the VuQube controller, press and release the
ON button. Wait for the status light to flash orange,
and then WAIT 4 MORE SECONDS.
2. Press and release the ON button 4 times.
The status light starts rapidly flashing green and red.
3. Press and hold the button for 4 seconds.
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF. GO TO PAGE 14 AND RUN THE CHECK SWITCH.