Owner`s manual
DISH
10
IMPORTANT! If you chose Tailgater Mode do not use these operating instructions. Go to page 14.
Your local channels may not be available when traveling outside your home area.
Section 4 OPERATION
POWER UP
1. Make sure all connections are made as shown on page 3.
2. Press POWER to turn on KING Flex controller.
• All lights turn on briey.
• The COAX CONNECTION light ashes 10 times.
• The SCAN PROGRESS lights ash 3 times to indicate the currently selected service
conguration and then turn off.
• If the unit is operating properly, the COAX CONNECTION light will remain on and all other
lights will turn off.
3. Turn the TV and satellite receiver on.
• Antenna is now ready to scan for satellites. Go to next page.
IMPORTANT!
The antenna unit requires a
“direct line of sight” to the
satellites for signal reception.
Any tall objects can block the
signal from reaching the antenna.