Owner`s manual
DIRECTV
4
ANTENNA CONFIGURATION
The KING Flex is factory pre-set for DIRECTV standard digital programming broadcast from the
101° W satellite (DIRECTV SD). If you also receive your local channels from DIRECTV’s 119 satellite
(DIRECTV SD with Locals), you must congure the antenna to work with your local channels.
Antenna conguration is a one time procedure that MUST BE COMPLETED before using your
KING Flex antenna. To congure your antenna, do the following:
1. Press POWER to turn on KING Flex controller. The COAX CONNECTION light will ash 10
times and then turn on, and the SCAN PROGRESS lights will ash 3 times to indicate the
selected service conguration.
2. Simultaneously press and hold POWER and SCAN for ve seconds.
The COAX CONNECTION light and the SCAN PROGRESS lights that indicate the currently
selected service will begin ashing.
3. Press SCAN repeatedly to scroll thru the available service provider options.
Section 2 ANTENNA AND ALARM CONFIGURATION
NOTE: If you have DIRECTV SD service you do not need to congure your antenna. Go to step 7 on next page.
If you wish to disable the alarm feature, complete all of the steps on these two pages.
NOTE: To verify the current service conguration without changing it, perform steps 1-2 and 4-6.