User’s Manual Vuze XR Dual 2D 360° & 3D 180° VR camera
Welcome, Vuze XR Camera is a dual VR camera with up to 5.7K resolution and two capture modes: 1. 2. 2D 360 – captures full spherical videos and photos. 3D 180 – captures half spherical videos and photos in stereoscopic 3D. The spherical 360 footage of up to 4K 30FPS and stereo 180 of up to 4K 60FPS is stitched in the camera using proprietary stitching technology developed for use with the camera. The camera is provided together with Vuze VR Studio for processing spherical 360 of 4K 60FPS and all 5.
Table of contents Package contents Description Dual 360° and 3D 180° camera Before Using Your Camera Operation Power on/off Camera configuration Capture modes Capture a video Capture a photo Charging the camera Using the Camera with an External Power Source SD Card Replacement Connecting to the Vuze XR Camera App via WiFi WiFi LED indicator Setting up WiFi on iOS WiFi Reset Connecting to Computer and Editing with Studio Camera Reset Camera Factory Reset Firmware Upgrade Specifications Error messages Safety
Package contents Package contents USB-A to USB-C charging and data cable Vuze XR Dual 360° and 3D 180° camera Multi-spandex fabric protective pouch Camera strap Check the package contents for damage. If any item is damaged or missing – do not use the camera and contact support at www.vuze.camera/contact 4 Proprietary.
Description Description Dual 360° and 3D 180° camera Microphone Capture modes indicator Microphone Lens release button WiFi button WiFi status indicator Power on/off and camera status indicator Power on/off and capture mode selection button Shutter LED Capture button microSD card slot USB-C connector Charging indicator Interfaces panel door Standard 1/4” screw mount Before Using Your Camera Before using your camera, charge it for at least 2 hours to make sure it is fully charged.
Operation Operation Power on/off To turn the camera on – long press the Power/Mode button. The indication light will light up blue (3-5 seconds) and then blink white 3 times. You will hear 3 beeps when the camera is ready. The indication light will remain white when the camera is turned on and ready to capture. To turn the camera off - Press the Power/Mode button for 3 seconds. You will hear 3 beeps and the indication light will blink once.
Operation To open the lenses, press the lens release button. There will be two beeps when lenses are released and two beeps when lenses get into 3D 180 position. The camera will now capture in the 3D 180 configuration. To close the lenses - push the lenses back until locked inside the lenses frame and you hear a click. There will be two beeps when lenses are pushed back and an other two beeps once the lenses are secured in 2D 360 position. The camera will now capture in the 2D 360 configuration.
Operation Capture a video Ensure microSD card is inserted and camera is in video mode ( ). Press the capture button to start recording. You will hear a long beep when recording begins and the Shutter LED LED will start blinking white. Press the capture button again to stop. You will hear a long beep when recording ends and the Shutter LED LED will turn off. • The power button LED will start blinking orange if there is an SD card error or memory is low • Ensure camera lenses are clean before use.
Operation Using the Camera with an External Power Source To extend the battery life you can use an external power bank while capturing with your camera. Ensure the power bank and cable are hidden under your camera to avoid interfering with the camera’s field of view. To use a power bank simply connect the USB cable to the camera’s USB-C port. Connect the other end of the cable to the external power bank. SD Card Replacement To insert, place the SD card into the micro SD slot and press into place.
Operation Connecting to the Vuze XR Camera App via WiFi The Vuze XR Camera App allows you to control your camera, preview and download captured media remotely using your mobile device. You can download the Vuze XR Camera App from Google Play or Apple Store. To connect to your camera to an Android device follow the steps below: 1. Turn the camera on. 2. Make sure the camera’s WiFi is on or turn it on by pressing the WiFi button. 3. Start the Vuze XR Camera App and choose “Connect”. 4.
Operation Setting up WiFi on iOS To enable access to the Internet while connected to the camera it is neccessary to manually set up the WiFi connection on your iOS device. 1. Once connected to the camera WiFi tap on the Info button. Proprietary. Humaneyes Technologies 2. Note the IP address, Subnet Mask and Router. Tap on “Automatic”.
Operation 3. Switch from Automatic to Manual and enter the IP Address, Subnet Mask and Router Address from the previous screen. WiFi Reset To reset the camera’s WiFi password press and hold the WiFi button for 3 seconds. Connecting to Computer and Editing with Studio To work with 5.7K and 60fps media capture with your Vuze XR camera, you need to use Vuze VR studio software available for your PC or MAC computer. With Vuze VR Studio you can edit and share any media captured with Vuze and Vuze XR cameras. 1.
Operation Camera Reset Press and hold the On/Off button for 16 seconds while the camera is on. This can be used in a situation where camera is not responding. Camera Factory Reset To reset the camera to factory defaults turn the camera on and press and hold capture button simultaneusly with the On/Off button for 8 seconds while the camera is on. Firmware Upgrade See our support page for updates regarding Firmware www.vuze.camera/support.
Specifications Specifications Sensors Lenses Media FOV ISO Processor Controls Indications Operating temperature Operating humidity Battery type Battery life Motion tracking Memory WiFi USB port Video resolution and frame rate Video bitrate Video format, compression Photo resolution Photo format Live stream Microphones Format Camera weight Camera dimensions Camera colors Camera model Included accessories UPC / EAN Optics 2 x Sony 12MP IMX-378 2x F/2.
Specifications Error messages LED Color Power/ White/Red blink Mode LED Orange blink Red blink Red Charge LED White/Red blink Meaning Resolution Low battery warning Charge the camera Low memory warning / SD card failure warning High temperature warning High temperature alarm Charging fault Make sure you are using a compatible memory card. Free up space on the memory card Stop recording and let the camera cool down. Proprietary. Humaneyes Technologies 15 Camera will turn off by itself.
Safety Safety Please read the following safety information before using your camera. Attention to these warnings will help prevent personal injuries and damage to the product. This camera should be used in a responsible manner for its intended purpose. Humaneyes Technologies shall not assume responsibility for damages caused by disregarding these safety guidelines. Before use, please check there are no signs of damage to the camera.
Safety Charger Electrical Safety • The following information on electrical safety must be observed; failure to follow these instructions may lead to electric shock, fire and/or serious personal injury or death. • Never use the charger if the power cable is damaged. Check the power cable on a regular basis to ensure that it is in proper operating condition.
Warranty Warranty THE CAMERA LIMITED CONSUMER WARRANTY Who is this Warranty from? This limited consumer warranty (herein the “Warranty”) is granted by Humaneyes Technologies Ltd. (herein the “Company,” “Us,” or “We”). What are the products as defined in this Warranty? The Product/s refers to any new hardware devices purchased from Us, directly or through our authorized distribution channels.
Warranty law and the Company policy, as follows: Our Customer Support Team will instruct You on how and where to return Your Product. The Company may send You waybills and if applicable, packaging material and instructions on how to properly pack and address the Product, so that You may ship the Product to an authorized service provider location. Instructions may be sent via email or in hard copy with the packaging material.
Warranty SET FORTH HEREIN, INCLUDING BUT NOT LIMITED TO ANY LIABILITY FOR A PRODUCT NOT BEING AVAILABLE FOR USE, LOST PROFITS, LOSS OF BUSINESS OR FOR LOST OR CORRUPTED DATA OR SOFTWARE, OR THE PROVISION OF SERVICES AND SUPPORT. EXCEPT AS EXPRESSLY PROVIDED HEREIN, THE COMPANY WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT OR PUNITIVE DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR FOR ANY CLAIM BY ANY THIRD PARTY.
Regulations and Disposal Regulations and Disposal The Camera contains components which should not be treated as household waste. For more detailed information about recycling of this product see: www.vuze.camera/support Federal Communications Commission Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Regulations and Disposal Canada, Industry Canada (IC) Notices This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d’Industry Canada (IC) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
Regulations and Disposal NCC 警語 依據低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、 商號或使用者均不得擅自變更頻率 加大功率或變更原 設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通 信；經發現有干擾現象時，應立即停 用，並改善至無 干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用 電波輻射性電機設備之干擾。 RF Output table Specification WiFi Frequency Range 5150MHz – 5250MHz 5725MHz – 5855MHz 2412MHz – 2472MHz 2402MHz – 2480MHz BLUETOOTH Maximum Output Power (EIRP) 13.74 dBm 13.80 dB 13.25 dBm 5.
