manual

Volume up

Volume down

Mute

Modular plug

X100 USB ADAPTER

Compatible with Windows® and

Macintosh® operating systems

1. Insert the modular plug into the X100 USB adapter.

2. Insert the USB connector into a USB port on your computer

(not into the keyboard).

3. Connect the QD to your VXi headset.

4. Check the audio settings (speaker and microphone) on

your softphone and in Windows to ensure that the initial

settings are at an appropriate level.

Connecting the X100 USB Adapter

Installing the X100 USB Adapter

For Windows Me or higher: Installation is automatic once

inserted into the USB port of your computer.

For Macintosh: Please visit the X100 USB Adapter support

section at www.vxicorp.com for more information.

USB connector

USB adapter

PAGE 1
X100 USB ADAPTER USB connector Compatible with Windows® and Macintosh® operating systems Volume up Mute Volume down USB adapter Modular plug Connecting the X100 USB Adapter 1. Insert the modular plug into the X100 USB adapter. 2. Insert the USB connector into a USB port on your computer (not into the keyboard). 3. Connect the QD to your VXi headset. 4. Check the audio settings (speaker and microphone) on your softphone and in Windows to ensure that the initial settings are at an appropriate level.
PAGE 2
VXi LIMITED WARRANTY 1. If your VXi X100 USB Adapter fails to work for any reason during the first two years from the date of purchase, VXi will repair or replace the VXi X100 USB Adapter at its election, free of charge. Products returned to VXi after the two-year warranty period will be repaired as "out of warranty" products, and purchaser will be billed for such repairs pursuant to the Out-of-Warranty Repair provisions set forth below. 2.