User`s manual

VXI Technology, Inc.
122 Tektronix to VXI Technology Cross-Ref. Guide
In the Tektronix SurePath family of switch modules, at least one SurePath controller card must be
installed to ensure proper communications. The controller card may be installed in one of the
switch modules, or it may be installed in the VX4101A MultiPaq device. If it is installed in one of
the switch cards, the corresponding driver layer is the tkvx43x0_32.dll, which is addressed in the
individual module sections. If the controller card is installed in the MultiPaq, the corresponding
driver layer is the tkmpscan_32.dll. The VTI translation driver set includes both SurePath driver
layers. The supported functions for the tkmpscan_32 translation are listed below.
TABLE 12-5: TKMPSCAN_32.DLL: VTI4101A TRANSLATION DRIVER SET, SUPPORTED
FUNCTIONS, SUREPATH
Class or Window Function
Initialize SurePath tkmpscan_initialize
Master tkmpscan_ID_slaveModules
Master tkmpscan_catalogModules
Master tkmpscan_moduleNames
Master tkmpscan_readTriggerSources
Master tkmpscan_queryModuleNumber
Common Functions tkmpscan_closeRelayList
Common Functions tkmpscan_openRelayList
Common Functions tkmpscan_openAll
Common Functions tkmpscan_powerFailure
Common Functions Scan tkmpscan_scan
Common Functions Scan tkmpscan_abortScanList
Common Functions Scan tkmpscan_triggerSetup
Common Functions Scan tkmpscan_initializeTrigger
Common Functions Scan tkmpscan_executeTrigger
Common Functions Relay Delay tkmpscan_closeDelay
Common Functions Relay Delay tkmpscan_openDelay
TKVX4320 Configure tkmpscan_closeRelayVX4320
TKVX4320 Configure tkmpscan_queryRelayVX4320
TKVX4330 Configure tkmpscan_configureScanner
TKVX4330 Configure tkmpscan_disjoinScanners
TKVX4330 Configure tkmpscan_joinScanner
TKVX4330 Configure tkmpscan_scannerMuxMode
TKVX4330 Configure tkmpscan_closeRelayVX4330
TKVX4330 Configure tkmpscan_openRelayVX4330
TKVX4330 Configure tkmpscan_queryRelayVX4330
TKVX4350 Configure tkmpscan_closeRelayVX4350
TKVX4350 Configure tkmpscan_openRelayVX4350
TKVX4350 Configure tkmpscan_queryRelayVX4350
TKVX4351 Configure tkmpscan_configureModeVX4351
TKVX4351 Configure tkmpscan_closeRelayVX4351
TKVX4351 Configure tkmpscan_openRelayVX4351
TKVX4351 Configure tkmpscan_queryRelayVX4351
TKVX4380 Configure tkmpscan_closeRelayVX4380
TKVX4380 Configure tkmpscan_openRelayVX4380
TKVX4380 Configure tkmpscan_queryRelayVX4380
Utility Error Handling tkmpscan_error_query
Utility Error Handling tkmpscan_error_message
Utility tkmpscan_reset
Utility tkmpscan_self_test
Utility tkmpscan_revision_query
Exceptions
1.) Status functions are not supported within the SMIP II family of switch cards.