User`s manual

VXI Technology, Inc.
18 Tektronix to VXI Technology Cross-Ref. Guide
INTERFACING TO THE MODULE
The SM4330A has two 160-pin high density DIN connectors on its front panel for I/O interfacing.
Mating connector and pin part numbers are referenced below. These parts can be ordered directly
from VXI Technology or the manufacturer listed in the table.
ACCESSORIES
70-0246-000: Connector Kit (Includes Two 160-Pin Connector, Two Backshells and a 500 Crimp Pin Reel)
Desc: Connector Kit Mfgr.: VXI Tech. Mfgr P/N: 52-0236-000 Contact Info: 949-955-1VXI/www.vxitech.com
Desc: Connector Mfgr.: ERNI Mfgr P/N: 024070 Contact Info: 804-530-5012/www.ernicomponents.com
Desc: Backshell Mfgr.: ERNI Mfgr P/N: 173051 Contact Info: 804-530-5012/www.ernicomponents.com
Desc: Crimp Pins Mfgr.: ERNI Mfgr P/N: 014729 Contact Info: 804-530-5012/www.ernicomponents.com
27-0088-160: 160-Pin DIN Connector
Desc: Connector Mfgr.: ERNI Mfgr P/N: 024070 Contact Info: 804-530-5012/www.ernicomponents.com
27-0236-001: Backshell
Desc: Backshell Mfgr.: ERNI Mfgr P/N: 173051 Contact Info: 804-530-5012/www.ernicomponents.com
52-0109-001:Crimp Pins (500 Pin Reel)
Desc: Crimp Pins Mfgr.: ERNI Mfgr P/N: 014729 Contact Info: 804-530-5012/www.ernicomponents.com
The SM4330A is designed to provide a pin-to-pin replica of the Tektronix VX4330. This eases the
burden of integrating the SM4330A into preexisting test fixtures and makes re-cabling
unnecessary. Translation drivers are provided to make the software transition seamless, enabling
the VTI units to use the previously installed Tektronix driver calls. This ensures that any
application code written using the Tektronix plug&play drivers need not be modified.