User`s manual

VXI Technology, Inc.
56 Tektronix to VXI Technology Cross-Ref. Guide
INTERFACING TO THE MODULE
The SM4351 has two, high density 41-pin connectors on its front panel for I/O interfacing. There
are two additional 2-pin connectors that provide access to the open bus input Mating connector
and pin part numbers are referenced below. These parts can be ordered directly from
VXI Technology or the manufacturer listed in the table.
ACCESSORIES
70-0190-001: 41-Pin Connector Kit with Strain Relief and Pins
Desc: Conn. Strain Relief, 41-Pin Mfgr.: AMP Mfgr P/N: 201766-1 Contact Info: 800-522-6752/www.amp.com
Desc: Conn. Housing Mfgr.: Positronics Mfgr P/N: GMCT41F000000 Contact Info: 800-641-4054/www.positronic.com
Desc: Contact, Crimp Pin, Qty: 44 Mfgr.: Positronics Mfgr P/N: FC114N2 Contact Info: 800-641-4054/www.positronic.com
NOTE: This backshell provides additional space for applications requiring full population of the connector.
70-0190-000: 41-Pin Connector Kit with Strain Relief (No Pins)
Desc: Conn. Strain Relief, 41-Pin Mfgr.: AMP Mfgr P/N: 201766-1 Contact Info: 800-522-6752/www.amp.com
Desc: Conn. Housing Mfgr.: Positronics Mfgr P/N: GMCT41F000000 Contact Info: 800-641-4054/www.positronic.com
NOTE: This backshell provides additional space for applications requiring full population of the connector.
52-0102-001: Connector Kit (Including 1 ea. Connector & Backshell, Plus 44 Crimp Pins)
Desc: Connector & Backshell Mfgr.: Positronics Mfgr P/N: GMCT41F0E100J0 Contact Info: 800-641-4054/www.positronic.com
Desc: Crimp Pins Mfgr.: Positronics Mfgr P/N: FC114N2 Contact Info: 800-641-4054/www.positronic.com
NOTE: At full population, this connector does not allow for cable dressing.
27-0144-002: 2-Pin Connector
Desc: 2-Pin Connector Mfgr.: AMP Mfgr P/N: 104257-1 Contact Info: 800-522-6752/www.amp.com
27-0016-999: Crimp Pins
Desc: Crimp Pins Mfgr.: AMP Mfgr P/N: 530553-7 Contact Info: 800-522-6752/www.amp.com
52-0113-000: 10-Pin Cable Assembly
Desc: 6ft. 14GA Wire, 10 Crimp Pins Mfgr.: VXI Tech. Mfgr P/N: 52-0113-000 Contact Info: 949-955-1VXI/www.vxitech.com
46-0012-000: Crimp Tool w/ Turret Head
Desc: Crimp Tool w/ Turret Head Mfgr.: Positronics Mfgr P/N: 9501 and 9502-1 Contact Info: 800-641-4054/www.positronic.com
46-0014-000: Insertion Tool
Desc: Insertion Tool Mfgr.: Positronics Mfgr P/N: 9099 Contact Info: 800-641-4054/www.positronic.com
46-0015-000: Extraction Tool
Desc: Extraction Tool Mfgr.: Positronics Mfgr P/N: 9081 Contact Info: 800-641-4054/www.positronic.com
In many ATE applications, a termination panel for the instrumentation is utilized. This termination
panel will have connectors that mate to the UUT or an intermediate test fixture. A termination
panel may take the form of an Interconnect Assembly (ICA) made by manufacturers such as
Virginia Panel or Macpanel. In either case, it is desirable to maintain the same I/O layout at the
panel to avoid costly redesign of test fixturing or UUT cable assemblies.
VXI Technology offers a couple of options that prevent the need for any interface panel to UUT
redesign as follows:
• wired funnel assemblies that mate directly to the SM4351 front panel
• custom cabling between SM4351 front panel and ICA/termination panel
For customers who plan on developing their own cabling between the SM4351 and the
termination panel, this section provides a cross-reference pinout table between the VX4351 and
the SM4351 in Figure 7-1.