Wireless Headset User Guide
The headset’s audio and visual indicators will indicate the level of available battery
power as follows.
When headset is in base:
• Green light: Fully charged.
• Red light: Normal charging/Okay to use.
When headset is removed from base:
• Flashing red light every few seconds:
low battery warning.
• Double beep heard every 30 seconds:
low battery warning.
When the headset indicates low battery power you will have only a few minutes until
the headset loses power. If you lose power during a call, simply pick up the handset
on your phone before placing the headset back in the charger base.
One hour of charge time will yield approximately 1 hour of talk time. In the
meantime, you may use your telephone handset to make or receive calls.
Battery Information
The Blue Parrott B100 battery is guaranteed for 1 year. To order a new battery, please
call VXI at 1-800-742-8588 or visit our website to order online at
www.blueparrott.com. Instructions for easy installation of the new battery will be
included.
Talk Time And Standby Time
After the headset is fully charged, you will enjoy a total talk time of up to 6 hours
and a standby time of up to 100 hours.
11
Blue Parrott B100 Wireless Headset Blue Parrott B100 Wireless Headset
16
2. Next, quickly press the multifunction button on the headset for 1 second.
Afterwards, you will hear a single beep in the headset as the headset disconnects.
The call will remain active on the handset until the parties hang up.
Call Waiting / Three-Way Conferencing
If your phone service includes call waiting or three-way conferencing, it is possible to
use these services with your Blue Parrott B100 headset. The multifunction button on
the headset will take the place of the Flash button (cordless) or hook switch (corded)
on your phone.
Call Waiting
1. When a second call is incoming, you will hear your service provider’s standard
call-waiting tone in your headset.
2. Be sure your telephone handset has been hung up (corded) or turned off
(cordless).
3. Press the multifunction button on the headset twice rapidly. Do not hold down
the button too long or you will disconnect the call.
4. You will be connected to the second call and the first call will be put on hold.
5. You can switch between callers as often as you like by pressing the
multifunction button on the headset twice rapidly.
6. When you are ready to hang up, quickly press the multifunction button for 1
second. Afterwards, you will hear a single beep and the calls will be
disconnected.
Note: If you do not want to answer the second incoming call, simply keep talking. You will hear the beep periodically
reminding you of the second call until you retrieve the call or the caller hangs up.
Three-Way Conferencing
It is recommended that you initiate three-way conferencing on your telephone
first, and then switch from the handset to the headset after the parties are on